Wuxi MitraStar Technology Co. Ltd DSL100HNUT1V3 Manual Do Utilizador
Chapter 5 WAN Setup
43
5.3.2 Configuring More Connections Advanced Setup
Use this screen to edit your Device's advanced WAN settings. Click the Advanced Setup button in
the More Connections Edit screen. The screen appears as shown.
Figure 23 More Connections: Edit: Advanced Setup
The following table describes the labels in this screen.
Table 7 More Connections: Edit: Advanced Setup
LABEL
DESCRIPTION
RIP & Multicast Setup
RIP Direction
Select the RIP Direction from None, Both, In Only and Out Only.
RIP Version
You do not configure this field if you set the RIP Direction field to None.
Select the RIP Version from RIP-1, RIP-2B/RIP-2M.
Select the RIP Version from RIP-1, RIP-2B/RIP-2M.
Multicast
Devices use the IGMP (Internet Group Management Protocol) network-layer
protocol to establish membership in a multicast group. Select IGMP v1/IGMP-v2/
IGMP-v3. Select None to disable it.
MLD Proxy
Select the version of MLD proxy (v1 or v2) to have the Device act as for this
connection. This allows the Device to get subscription information and maintain a
joined member list for each multicast group. It can reduce multicast traffic
significantly. Select None to turn off MLD proxy.
ATM QoS