Cotton On USA Inc QKH6 Manual Do Utilizador
6. Microphone
7. LED indicator
PAIRING
7. LED indicator
PAIRING
1. Make sure your phone, computer or music device is turned on and
within 1 meter of each other.
2. Hold down Multifunction On/Off button (1) for about 3 seconds until LED
light starts to flash BLUE quickly.
3. Activate the Bluetooth feature on your phone or device and set it to
search for Bluetooth devices (Discoverable).
4. Select ‘L6’ from the list of found devices.
5. If necessary, enter passcode ‘0000’ to pair and connect the headphones
5. If necessary, enter passcode ‘0000’ to pair and connect the headphones
to your device.
6. Once successfully paired, the LED light will flash BLUE once every few
seconds
PLAYBACK / CONTROLS
1. Press Multifunction button Play/Pause (1) to start and pause audio.
2. Press (button 5) to skip forward to next track. Press and hold down
2. Press (button 5) to skip forward to next track. Press and hold down
button to increase volume.
3. Press (button 2) to go back to previous track. Press and hold down
button to decrease volume.
Note: The controls will not function when charging.
CALLS
CALLS
1. To answer an incoming call, press the Multifunction Play/Pause (button
1)
2. To end call, press the same button again
3. To decrease or increase the volume during the call, press and hold
3. To decrease or increase the volume during the call, press and hold
down button 2 or button 5
POWER ON
Press and hold the Multifunction button (1) to turn the headphones on. The
LED indicator will flash BLUE when headphones are on.
POWER OFF
Press and hold the Multifunction button (1) to turn the headphones off. The
LED indicator will stop flashing when off.
Press and hold the Multifunction button (1) to turn the headphones on. The
LED indicator will flash BLUE when headphones are on.
POWER OFF
Press and hold the Multifunction button (1) to turn the headphones off. The
LED indicator will stop flashing when off.