ValueChain LLC SZBCF888 Manual Do Utilizador
4
V○
a
luePad VP111 / VP112 Quick Start Guide
Connect the tablet to a computer for 12 hours or longer to restore a low level battery
In some cases, when the battery is drained to 10% or lower, you will need to connect it to a computer overnight (>
12 hours) using the included USB cable to restore the battery before using the reset button in the pin hole or
charging it with the wall adapter. Again this is the way lithium batteries are. Search “empty battery tablet won't
start up” for many helpful tips in the millions results.
12 hours) using the included USB cable to restore the battery before using the reset button in the pin hole or
charging it with the wall adapter. Again this is the way lithium batteries are. Search “empty battery tablet won't
start up” for many helpful tips in the millions results.
ON, OFF, and SLEEP
Turning the ValuePad On
• To turn the ValuePad ON from an Off state, gently hold the power button for 3 to 8 seconds depending on
battery level. To turn the ValuePad on from “Sleep” mode, simply press the power button.
Turning the ValuePad Off
• To turn the ValuePad off completely, you must hold the power button down for about 2 seconds. A menu
will appear. Select “Power Off”. This is important when traveling with the device, or when the tablet is not in
use for extended periods of time, and to save battery.
use for extended periods of time, and to save battery.
Sleep
• ”Sleep” mode requires a much shorter boot up time. To put the tablet in sleep mode, simply press the power
button briefly. To turn the ValuePad on from the sleep mode, also briefly press the power button. Note: WiFi,
Bluetooth, movies and games continue to drain battery while in Sleep mode.
Bluetooth, movies and games continue to drain battery while in Sleep mode.
• If tablet doesn't come back on after battery drained, connect it to a computer overnight using the USB cable
before charging it with the wall adapter.
Home Screen Information
WiFi Settings
Enter network settings by pressing
button to set up WIFI as shown in the following picture. Select your WiFi
network and key in password when prompted.