SBO Hearing A/S REMCTR01 Manual Do Utilizador

Página de 3
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
SBO Remote Control Radio Model - Quick Installation Guide 
 
Radio Model Name: RCRM 
 
The RCRM is a module intended for Remote Control devices. It is equipped with a micro processer host and a short range low power radio system including a PCB 
loop antenna on board at the same printed circuit board (PCB). 
Besides the host and the radio system the module also includes a power management circuit, battery connector, 3 switches, and small discrete components. 
 
When the RCRM is mounted inside the plastic shells of a remote control device, then the 
whole product shall normally be hand held or placed on a table, when the user has one or 
two wireless hearing aids on the ears, also running at a radio frequency of 3.84 MHz.  
 
The radio system inside the module is a low power, inductive radio transmitter working 
at 3.84 MHz and consisting of (see illustrations next page): 
A TX circuit and 
A 7.68 MHz crystal 
 
The low power, inductive radio transmitter is consisting of  an “AND” and an “XOR” 
gate making the modulation fed with data from the host, a  clock oscillator  and two 
switching transistors  feeding the modulated RF signal at 3.84MHz to the PCB  loop 
antenna. 
 
The module mounted inside a plastic shell is shown to the right: 
 
 
NB: The RCRM is intended ONLY for SBO Hearing and OEM branded products 
intended for remote control of hearing aids at 3.84 MHz. If used for other types of products or systems, SBO Hearing cannot guarantee continued 
conformance with FCC part 15 regulations. Because of this and due to limited shielding of the module, the RCRM is approved only with a limited 
modular approval.
 
 
SBO Hearing A/S 
 
Kongebakken 9 
 
 
DK-2765 Smørum   
 
www.sbohearing.com 
 
Main +45 39 17 71 00 
 
Fax +45 39 27 79 00 
 
Denmark   
 
 
CVR-no. 42334219
 
 
 
1