Honeywell VCU-04 Manual Do Utilizador

10

The swivel support toolkit contains the following items:

The following screwdrivers are required for the installation:
• One small cross screwdriver
• One T10 Torx screwdriver
• One medium cross screwdriver
• One 0-1 flat head screwdriver

To optimize the installation, Temaline recommends that you use the cable 

with smallest AWG allowed according to the tables below. If the power 

supply wire exceeds the AWG 20, Temaline strongly recommends that 

you terminate the wire with a smaller AWG.

The Voyager device can be powered either with a 10V-30V DC 

power supply or 48V PoE. To determine the correct size of the power 

cable, see the table below.

Max voltage cable drop allowed must not exceed 0.8 VDC when 

the voltage is 12V. (Typical input current is 500mA.)

The tables below show the values for one reader. If more than one reader 

is connected to the same line, divide the distance by the number of the 

readers on the same line.
The following table lists examples of wire gauge and distance for a 12V 

and a 24V power supply.

1

Tamper switch with cable

1

Drilling template

3

Screws for Fisher plug S5V

3

Plastic plug Fisher S5C

2

Torx screws for reader closing