Atoms Labs LLC AWF53 Manual Do Utilizador
QUICK START GUIDE
KIT CONTENT :
Camera Antenna
x 1
x 1
x 1
Quick Start Guide
Power Adapter
x 1
PRODUCT OVERVIEW
SETUP THE CAMERA
For iOS
For Android
1. APP Download
Download and install the "OMGuard HD" APP to your device.
2. Power up The Camera
Connect the power wires to the adapter supplied, and wait until the RED LED indicator becomes
steady on. This process would be finished within 1 min and make sure the LED is flashing in RED.
3a.Wireless Connection
(1) In the Wi-Fi setting of your smart device. Choose the Wi-Fi router with prefix of HD-xxxxxx
(xxxxxx=Camera ID numbers). Then enter the default password 12345678.
(2) Launch the APP, tap to add the camera.
(3) Tap (QR code icon) and scan the QR code label on the back of the camera to bring up the DID
information. Or tap "Search" to locate the camera.
(4) Enter the default password 123456.
(5) Tap “Save” when you done.
(6) Later, APP will request user to modify the default password to private password .
Note:
Press and hold the “Reset” button for 5 seconds, the
system will be restored into factory default.
Pan/Tilt Wireless Camera
x 1
Screw Pack
1
2
3
4
5
x 1
Rj45 Connect Jack
Micro SD Card Slot
Microphone
Antenna
Lens
Reset Button
Light Sensor
Mount Bracket.
Ethernet Cable
Power Cable
x 1
Hex Key
FRIENDLY REMINDER
- For video recording, BE SURE TO use CLASS 10 memory card or above (not included). Other kinds of
memory card may cause unexpected results and should be avoided.
- Anytime when you find the camera pan/tile function does not perform properly, calibrate the camera
to get correct principle position (refer to step 8 of setup the camera section).
- For better performance, please enable the video hardware acceleration function. This function only for
Andriod (refer to the app introduction section).
AWF53
HD Outdoor PT Network Camera