HARXON CORPORATION HX-DU8608D Manual Do Utilizador
[HX-DU8608D User Manual]
4 / 10
1、 Interface
2.1 Serial data line interface
Interface type: asynchronous serial communication standard of RS232
Pin definitions：
Pin 1------Power，9-16V DC；
Pin 2------power grounding，Power GND；
Pin 3------serial data receiver，RXD；
Pin 4------serial signal grounding；
Pin 5------serial data transmission，TXD
Pin 1------Power，9-16V DC；
Pin 2------power grounding，Power GND；
Pin 3------serial data receiver，RXD；
Pin 4------serial signal grounding；
Pin 5------serial data transmission，TXD
2.2 RF interface
HX-DU8602T RF interface is TNC female connector of 50Ω
3、Function and operating instruction
3.1 Booting
Press the button of ON/OFF to boot. LED indicator of ON is green, which means
the voltage is normal, and the machine can work normally; if LED indicator of ON is
red flash, which means the voltage is too low, low voltage protection has been worked;
if LED indicator of ON is red, which means the voltage is too high, overvoltage
protection has been worked.
red flash, which means the voltage is too low, low voltage protection has been worked;
if LED indicator of ON is red, which means the voltage is too high, overvoltage
protection has been worked.