Prentke Romich Company ACN1000PRC Manual Do Utilizador
Attaching the Device Frame
Removing the Screws from the Bottom of the Device
Before you can attach the frame, you must remove two screws from the bottom of the device.
Important! After removing these screws, set them aside. You will need them later if you want to secure
Important! After removing these screws, set them aside. You will need them later if you want to secure
the frame to the device with screws.
1. Place the device face-down on a flat surface with the bottom facing toward you.
2. Remove the screws shown below with a Phillips screwdriver.
1. Place the device face-down on a flat surface with the bottom facing toward you.
2. Remove the screws shown below with a Phillips screwdriver.
3. Set the screws aside. For information on using these screws, see “For an Even More Secure Fit” on
page 20.
Remove these two screws
Accent 1000 Hardware Manual
Page 15
PRELIMINARY