Ulterius Technologies LLC FDN40 Manual Do Utilizador
CHAPTER 6: NAT
Configuration User Manual
138
© Ulterius Technologies, LLC 2016. Confidential & Proprietary.
--------- ------------------- -------------------
----
----
Wan 0/1 80.0.0.5 255.255.255.0
6.4.4.2
WEB Configuration
Dynamic NAT can be configured through WEB interface using the Address
Pool screen (Navigation - Layer3 Management > NAT > Dynamic NAT)
Pool screen (Navigation - Layer3 Management > NAT > Dynamic NAT)
Screen 6-4: Address Pool screen
6.4.5
Configuring Virtual Server
Virtual Server is required to allow external world to avail services in corporate
world. This section describes the steps to configure telnet virtual server VS in
the LAN network so that the telnet request for H1 given by H2 is received and
handled by VS so that the IP address of host H1 remains hidden to outside
world.
world. This section describes the steps to configure telnet virtual server VS in
the LAN network so that the telnet request for H1 given by H2 is received and
handled by VS so that the IP address of host H1 remains hidden to outside
world.
6.4.5.1
CLI Configuration
1. To create a telnet virtual server:
Enter the global configuration mode.
UltOs# configure terminal
Enter Interface Configuration mode
UltOs(config)# interface wan 0/1
Create a virtual server for telnet.
UltOs(config-if)# virtual server 10.0.0.2 TELNET-server
Exit from the Interface Configuration mode.
UltOs(config-if)# end
2. To view the configured virtual servers