Galapad Technology Limited STR Manual Do Utilizador
Product: STRIKE ONE IoT Module
Model: SC01
Get Started with Galapad StrikeOne
2016/1/28 V1.0
Follow these steps to get started with Galapad StrikeOne:
First, make sure you have the following ready or available:
1) Windows 7 Professional Edition or Ultimate Edition
2) RVCT3.1 [Build 569]
1) Windows 7 Professional Edition or Ultimate Edition
2) RVCT3.1 [Build 569]
3) Microsoft Visual Studio 2008
Second, please register at www.galapad.net/strikeone. Note that you will need to input the Serial
Number which can be found on the back of the giftbox label.
Third, go to the "SDK Download" section of the site to download the documents. Unzip this file.
Third, go to the "SDK Download" section of the site to download the documents. Unzip this file.
Below are the files contained within and a brief introduction of each.
Galapad-IOT-Module-Development-Kit-V1.6 .zip
Galapad-IOT-Module-Development-Kit-V1.6 .zip
1)Galapad-Package:
GalapadDemo：
Source code of a demo linkit app on how to use GTXLib
GalapadDemo：
Source code of a demo linkit app on how to use GTXLib
Galapad-Test-App-and-VXP:
Includes the android app for testing hardware, and the test linkit app (vxp file)
GTXLib-and-HeaderFiles:
Includes the binary file of GTXLib and header files related with it
StrikeOne Datasheet-v1.32-0126.pdf:
Spec of the Strike One hardware
Galapad_Linkit_GTXLib_API_Doc1.2.pdf:
Documentation for all GTXLib APIs
MAUI.11C.W14.18.SP4.V16.F10.zip:
Firmware files for the StrikeOne hardware
2)MTK-Package:
Android_SmartDevice_Sample_Source_Code:
The sample source code of the android app for communication between android devices
and MTK wearable devices, released by MTK. Includes an introduction to the architecture.
and MTK wearable devices, released by MTK. Includes an introduction to the architecture.