Xwireless LLC PROFILE3G Manual Do Utilizador

Página de 17
FCC Hearing-Aid Compatibility (HAC)   
Regulations for Wireless Devices 
On July 10, 2003, the U.S. Federal Communications Commission (FCC) Report and Order in WT Docket 01-
309 modified the exception of wireless phones under the Hearing Aid Compatibility Act of 1988 (HAC Act) to 
require  digital  wireless  phones  be  compatible  with  hearing-aids.  The  intent  of  the  HAC  Act  is  to  ensure 
reasonable access to telecommunications services for persons with hearing disabilities. While some wireless 
phones are used near some hearing devices (hearing aids and cochlear implants), users may detect a buzzing, 
humming, or whining noise. Some hearing devices are more immune than others to this interference noise, 
and  phones  also  vary  in  the  amount  of  interference  they  generate.  The  wireless  telephone  industry  has 
developed  a  rating  system  for  wireless  phones,  to  assist  hearing  device  users  find  phones  that  may  be 
compatible with their hearing devices. Not all phones have been rated. Phones that are rated have the rating 
on their box or a label located on the box. The ratings are not guarantees. Results will vary depending on 
the user’s hearing device and hearing loss. If your hearing device happens to be vulnerable to interference, 
you may not be able to use a rated phone successfully. Trying out the phone with your hearing device is the 
best way to evaluate it for your personal needs. 
 
 
Hearing  devices  may  also  be  rated.  Your  hearing  device  manufacturer  or  hearing  health  professional  may 
help you find this rating. Higher ratings mean that the hearing device is relatively immune to interference 
noise. The hearing aid and wireless phone rating values are then added together. A sum of 5 is considered 
acceptable for normal use. A sum of 6 is considered for best use. 
In the above example, if a hearing aid meets the M2 level rating and the wireless phone meets the M3 level 
rating, the sum of the two values equal M5. This should provide the hearing aid user with “normal usage” 
while using their hearing aid with the particular wireless phone. “Normal usage” in this context is defined as 
a signal quality that is acceptable for normal operation. The M mark is intended to be synonymous with the 
U mark. The M and T marks are recommended by the Alliance for Telecommunications Industries Solutions 
(ATIS).  The  U  marks  is  referenced  in  Section  20.19  of  the  FCC  Rules.  The  HAC  rating  and  measurement 
procedure are described in the American National Standards Institute (ANSI) C63.19 standard.   
 
For information about hearing aids and digital wireless phones 
FCC Hearing Aid Compatibility and Volume Control: 
http://www.fcc.gov/cgb/dro/hearing.html
 
Gallaudet University, RERC: 
https://fjallfoss.fcc.gov/oetcf/eas/reports/GenericSearch.cfm
 
 
The Hearing Aid Compatibility rating is displayed on the wireless phone box. 
A phone is considered Hearing Aid Compatible for acoustic coupling (microphone mode) if it has 
an “M3” or “M4” rating. A digital wireless phone is considered Hearing Aid Compatible for 
inductive coupling (telecoil mode) if it has a “T3” or “T4” rating. 
The tested M-Rating and T-Rating for this device (FCC ID:
) are M4 and T3. 
2ADLJPROFILE3G