TDK Corporation S1100AM00 Manual Do Utilizador
Draft
● Do not use the activity tracker for any other purposes than
measuring activity or sleeping condition.
● The activity tracker body and wristband are in direct contact with the
skin. Sweat, dirt, dust, or other unnoticeable soil may contaminate
the cuffs of the clothes. See MAINTENANCE and use the activity
tracker properly.
the cuffs of the clothes. See MAINTENANCE and use the activity
tracker properly.
● Do not pull or bend the wristband forcibly.
- Otherwise, the activity tracker body may be dislocated and drop,
resulting in deterioration of the water resistance or defects.
- Such handling may deform or damage the wristband or buckle.
● Do not dip the wristband in hot water or cold water containing hot
spring components. Otherwise, the appearance of this product may
deteriorate.
deteriorate.
● If thinner, gasoline, solvent, oil, fat, or cleaner, adhesive, paint,
chemical, or cosmetics containing such materials are put on this
product, it may be discolored, deformed or damaged.
product, it may be discolored, deformed or damaged.
● This product uses a lithium ion battery.
Observe the instructions of your local government when
disposing of this product.
disposing of this product.
6.
COMPONENT NAMES
LED display
Pushbutton
[Body: Activity tracker]
[Wristband]
Micro-USB connector
Charging base
Micro-USB cable
[Charging adapter]
7.
HOW TO USE
(1) Install the smartphone application.
Access the following website from your smartphone.
The website provides a link to the application download.
The website provides a link to the application download.
http://www.toshiba.co.jp/healthcare/actmonitor/
* Make sure that your smartphone is listed in the
recommended and applicable model list for
the smartphone application.
the smartphone application.
Download from the following.
Android
TM
version: From Google Play
iOS version: From App Store
Install the application on your smartphone.
Install the application on your smartphone.
(2) Turn on power.
(i) Press and hold the pushbutton.
(ii) When the white LED goes on, release the pushbutton. The white
(ii) When the white LED goes on, release the pushbutton. The white
LED changes to green and the vibrator shows that power is turned
on. Even after the LED goes out, the power remains on.
on. Even after the LED goes out, the power remains on.
If the LED does not go on after pressing and holding the pushbutton for
5 seconds, the remaining battery level is low. Charge it with the charging
base.
5 seconds, the remaining battery level is low. Charge it with the charging
base.
(3) Set pairing mode
Pairing must be carried out before using the application. Follow the
instructions shown on the application screen to pair the device with the
smartphone.
instructions shown on the application screen to pair the device with the
smartphone.
●
Android
TM
(i) Press and hold the pushbutton until and after the blue LED
begins to blink. (Do not release the pushbutton)
(ii) White LEDs begin to blink in blue background.
(iii) Release the pushbutton now.
(iii) Release the pushbutton now.
● iPhone
(i) Press and hold the pushbutton until and after the blue LED
begins to blink. (Do not release the pushbutton)
(ii) White LEDs begin to blink in blue background.
(iii) Release the pushbutton now.
(iv) Press the pushbutton again before the LED goes off. Then the
(iii) Release the pushbutton now.
(iv) Press the pushbutton again before the LED goes off. Then the
LED will change from blue to yellow.
(4) Measure
(i) Start the smartphone application.
(ii) Follow the instructions to setup the Application.
(iii) Put on the activity tracker.
(ii) Follow the instructions to setup the Application.
(iii) Put on the activity tracker.
★ The activity tracker may stop working due to low battery so it is
recommended to charge the battery periodically.
(5) Sync with a smartphone.
Sync while your smartphone application is on.
(i) Hold the pushbutton.
(ii) Release the button when the LED begins to blink.
(i) Hold the pushbutton.
(ii) Release the button when the LED begins to blink.
★ The activity tracker adjusts the built-in calendar (date and time) when
it syncs with the smartphone. Adjust the time by syncing with the
smartphone when using the activity tracker for the first time or when
the power has been off. Data measured before syncing may have
different date and time.
smartphone when using the activity tracker for the first time or when
the power has been off. Data measured before syncing may have
different date and time.
★ 14 days of data are stored even after running out of battery. However,
data before 14 days ago will not be saved. Always remember to
charge or sync with your smartphone to protect your data.
charge or sync with your smartphone to protect your data.
(6) Turn off power.
Turn off the power as shown below when detaching the activity tracker from
the wristband for charging. Pay attention to where electronic devices are
prohibited or when the activity tracker has not been used for a long time.
(i) Press and hold the pushbutton to enter pairing mode.
(ii) Press and hold the pushbutton in pairing mode.
the wristband for charging. Pay attention to where electronic devices are
prohibited or when the activity tracker has not been used for a long time.
(i) Press and hold the pushbutton to enter pairing mode.
(ii) Press and hold the pushbutton in pairing mode.
All white LEDs go on once and then go out one by one. Power is turned
off when all LEDs go out.
off when all LEDs go out.
★ When inactive for 2 days, the activity tracker will be turned off
automatically for power saving.
(7) Charge.
(i) Turn off power and open the fastener of the band.
(ii) Stretch the band so that the body can be taken out of mounting
(ii) Stretch the band so that the body can be taken out of mounting
position.
(iii) Make sure the charging contacts at the
body and the charging base align before
charging. Slight magnetic force can be felt
when the body is attached to charger.
charging. Slight magnetic force can be felt
when the body is attached to charger.
★ Please be aware that the charging contacts
may be damaged if not properly attached.
(iv) Connect the micro-USB cable to the
charging base.
(v) Plug the micro USB into a power supply like
a PC to start charging built-in battery.
Battery charging is indicated by red LED
while the number of white LED lights
suggests battery level.
Battery charging is indicated by red LED
while the number of white LED lights
suggests battery level.
★ Charging stops when battery is full. Light blue
LED indicates the battery is fully charged.
★ If the active tracker is not used for a long
time, red LED may not light up immediately
when you charge the battery. In that case,
please wait for a minute or so. If red LED
remain off after that, the product is likely to be
out of order. Please stop charging.
when you charge the battery. In that case,
please wait for a minute or so. If red LED
remain off after that, the product is likely to be
out of order. Please stop charging.
(vi)
On completion of charging, light blue LED indicates charging is
complete.
complete.
(vii) Detach the activity tracker body from the charging base.
(viii) Stretch the band and align the pushbutton of activity tracker
(viii) Stretch the band and align the pushbutton of activity tracker
with the button position of band when attaching the activity
tracker to the band.
tracker to the band.
8.
IF NOT MEASURED PROPERLY
● Random movements
- Hanging from the waist or bag
- Placed in a bag with random movements
- Placed in a bag with random movements
● Irregular walking
- Walking with a shuffle
- Walking in sandals, Japanese geta, Japanese sandals, etc.
- Walking in an irregular manner in a crowded area
- Walking in sandals, Japanese geta, Japanese sandals, etc.
- Walking in an irregular manner in a crowded area
● Used in vertical movement or vibrating environment
- Standing up and sitting movements
- Sports other than walking and jogging
- Going up and down stairs or a steep slope
- Riding on a bicycle, motorbike, car, train, or bus
- Physical training of upper half of the body
- Sports other than walking and jogging
- Going up and down stairs or a steep slope
- Riding on a bicycle, motorbike, car, train, or bus
- Physical training of upper half of the body
● Walking extremely slow
● Repetitive short-term walking less than 5 seconds
● Instead of walking
● Repetitive short-term walking less than 5 seconds
● Instead of walking
- Working or studying at the desk, or moving arms frequently
● Used in a place subject to loud noise or continuous vibrations
● Excessive movement during sleeping
● Excessive movement during sleeping
9.
MAINTENANCE
● Follow the instructions below to use the product in a correct manner.
- Wipe off sweat and dust with a dry, soft cloth when taking off the
activity tracker from the wrist.
- Detach the body from the wristband and clean sweat and dust off
the band with running water. Wipe off wafter with dry, soft cloth
after rinsing.
after rinsing.
- Do not clean the body with water. Wipe off sweat and dust with
dry and soft cloth.
● Clean the activity tracker at least once a week with dry and soft
cloth.
● Clean the charging contacts with soft and thin cotton swabs at least
once a month or when the activity tracker cannot be charged. Please
be aware that charging contacts may be damaged if cleaned
improperly.
be aware that charging contacts may be damaged if cleaned
improperly.
● Do not clean the charging contacts with sharp tipped object like a
needle.
● Do not use acid or alkaline detergent.
● Do not wipe the product with such chemical as thinner, benzene,
● Do not wipe the product with such chemical as thinner, benzene,
alcohol, etc.
● Charge the battery periodically.
Charge the battery at least once a month even when the activity
tracker has not been used for a long time.
tracker has not been used for a long time.
10. TROUBLESHOOTING
Condition
Action
LED does not go on even
after the pushbutton is
pressed.
after the pushbutton is
pressed.
Power may be off. Turn on power.
LED does not go on even if
the pushbutton is held down
to turn on power.
the pushbutton is held down
to turn on power.
Connect the charging adapter to start charging.
Charging is not working.
Disconnect the charging cable and clean the
charging contacts of the body.
charging contacts of the body.
Charging does not start even
after the charging contacts
are cleaned.
after the charging contacts
are cleaned.
Contact our customer service.
The battery does not last
long.
long.
Reduce the times of syncing if you sync
several times a day.
several times a day.
Syncing with the smartphone
failed.
failed.
Check the Bluetooth
®
setting of the
smartphone. Start the smartphone application
and pair the devices.
and pair the devices.
Pairing failed.
Set the activity tracker in the pairing mode and
check the LED colors. Pair the device with the
following color.
・Blue LED for Android
check the LED colors. Pair the device with the
following color.
・Blue LED for Android
TM
・Yellow LED for iPhone
Pairing complete but syncing
failed.
failed.
Contact our customer service.
The battery runs out fast even
with syncing only once a day.
with syncing only once a day.
Use the battery until it is empty, and fully
recharge the battery. If the battery still runs out
fast, contact our customer service.
recharge the battery. If the battery still runs out
fast, contact our customer service.
11. SPECIFICATIONS
Product name
Activity Tracker
Model No.
S1100AM00
Sensor
Acceleration sensor
Compatible OS
Android: 4.0 or above
iOS: 7.0 or above
iOS: 7.0 or above
Communication
Compatible with Bluetooth
®
3.0/4.0. (Class 2)
Operating
temperature range
temperature range
5
˚C to 50˚C
Humidity operating
range
range
20% to 90% (Non-condensing)
Continuous operating
hours
hours
14 days * Time may vary depending on operating
conditions.
conditions.
Body size
Approx. 16 mm × 41 mm × 12 mm
Wristband size
When the longest band part is fixed to buckle:
Approx. 195 mm
When the shortest band part is fixed to buckle:
Approx. 140 mm
Thickness: Approx. 12 mm, width: approx.19 mm
Approx. 195 mm
When the shortest band part is fixed to buckle:
Approx. 140 mm
Thickness: Approx. 12 mm, width: approx.19 mm
Built-in battery
Li-ion rechargeable battery
Recharged battery
voltage
voltage
5 V ±10％
Ambient temperature
during charging
during charging
5
˚C to 40˚C
Charging approach
Proprietary USB charging adapter
Water- & dust-proof
class
class
IPX5/IPX7 or equivalent
Weight
Approx. 27 g (Body only: approx. 7 g)
Bluetooth is a registered trademark of Bluetooth SIG,Inc., USA.
Android and Google Play are trademarks or registered trademarks of Google Inc.
iPhone is a trademark of Apple Inc. registered in the United States and other
countries.
This product is not a medical instrument.
The information in this manual is subject to change without notice.
Android and Google Play are trademarks or registered trademarks of Google Inc.
iPhone is a trademark of Apple Inc. registered in the United States and other
countries.
This product is not a medical instrument.
The information in this manual is subject to change without notice.
■ Water Resistance
● This product has waterproof performance equivalent to JIS water
resistant class 5/7 (IPX5/7)*.
*IPX5:
The product performance is maintained when the product is
exposed to jet streams in all directions in the condition where
water is sprayed through a 6.3 mm I.D. nozzle at 12.5
liters/minute for more than 3 minutes at a distance of about 3
meters.
exposed to jet streams in all directions in the condition where
water is sprayed through a 6.3 mm I.D. nozzle at 12.5
liters/minute for more than 3 minutes at a distance of about 3
meters.
IPX7: Water does not penetrate inside and the product performance is
maintained when the activity tracker is dipped quietly in clean city
water at the normal temperature at the depth of 1 meter and left
for about 30 minutes.
water at the normal temperature at the depth of 1 meter and left
for about 30 minutes.
■ Precautions about Water Resistance
● Wipe off water immediately with a dry, soft cloth if the product is
exposed to water.
● Do not wear the activity tracker when swimming or taking a bath. Do
not wear in a sauna. Do not expose the activity tracker body to water
from a faucet or dip it in water.
from a faucet or dip it in water.
● The waterproof specifications are based on the test results of a
company entrusted by us. They do not warrant operations under all
conditions.
conditions.
12. WARRANTY AND AFTER-SALES
SERVICES
Contact the following service desk for inquiries or warranty or handling
of the product.
of the product.
● Contact the following customer service if a product is in trouble.
Please visit our FAQ below if you need any assistance.
http://www.toshiba.co.jp/healthcare/actmonitor/
For further assistance, please contact our
customer service.
customer service.
◆ Customer Service
Customer support center
Business hours: 9 am to 5 pm, Monday to Friday
(Holidays and beginning and end of year are excluded.)
Masago 5-20-7, Mihama-ku, Chiba-shi, Chiba 261-8580
(Holidays and beginning and end of year are excluded.)
Masago 5-20-7, Mihama-ku, Chiba-shi, Chiba 261-8580
The governing language of this instruction manual shall be Japanese.
No translation into any other language shall be taken into consideration
of this instruction manual.
0120-455-750
(Toll free)
Li-ion
(iii) Charging
terminal
(iv) Charging base
(v) Power source
Charging
contact
Button position
Activity tracker
mounting position
Fastener