Hangzhou Hikvision Digital Technology Co. Ltd. K1T605MF Manual Do Utilizador
Face Recognition Terminal User Manual
20
Setting RS-485 Parameters
Purpose:
The face recognition terminal can connect external secure door control unit or card reader via the
RS-485 terminal.
Steps:
1. On the Communication Settings page, tap RS-485 to enter the RS-485 tab.
The face recognition terminal can connect external secure door control unit or card reader via the
RS-485 terminal.
Steps:
1. On the Communication Settings page, tap RS-485 to enter the RS-485 tab.
2. Select an external device according to your actual needs.
Note:
Unit represents the secure door control unit and Reader represents the card reader.
3. Tap Baud Rate to enter the Baud Rate page.
4. Select a baud rate for connecting external device via RS-485 protocol.
5. Tap
4. Select a baud rate for connecting external device via RS-485 protocol.
5. Tap
to save the selected baud rate and go back to the RS-485 tab.
6. Tap
to save the RS-485 parameters and go back to the Home page.
Note:
If you change the external device, and after you save the device parameters, the device
will reboot automatically.
Setting Wiegand Parameters
Purpose:
You can set the Wiegand transmission direction and the Wiegand mode.
Steps:
1. On the Communication Settings page, tap Wiegand to enter the Wiegand tab.
You can set the Wiegand transmission direction and the Wiegand mode.
Steps:
1. On the Communication Settings page, tap Wiegand to enter the Wiegand tab.