SensingTek Co. Ltd. 10SDS1100 Manual Do Utilizador
4. LED status
`
LED status
Sigfoxnetwork status
Blue LED
1.
Blinking : Power ON
2.
LED OFF: Standby Mode
3.
Flash once: Send alarm signal.
Test mode
After pressing test button for around
1 second, the
buzzer sounds and Red LED flashes
continuously
1 second, the
buzzer sounds and Red LED flashes
continuously
Smoke Alarm Mode
When smoke detector senses
smoke, the buzzersounds an audible
alarm with 3 beeps, pause 1.5
seconds, then 3 beeps.The Red LED
will flash continuously and rapidly
smoke, the buzzersounds an audible
alarm with 3 beeps, pause 1.5
seconds, then 3 beeps.The Red LED
will flash continuously and rapidly
Low battery
Buzzer chirps once in 43 seconds
with Yellow LED
flashing
with Yellow LED
flashing
Tamper
When bracket is removed from
detector, the YellowLED is steadily
on and buzzer sounds temporarily
until the detector is mounted back to
the bracket.
The detector will be also alarmed if
the detector is
not mounted in the bracket within 3
minutes untilthe bracket is mounted
detector, the YellowLED is steadily
on and buzzer sounds temporarily
until the detector is mounted back to
the bracket.
The detector will be also alarmed if
the detector is
not mounted in the bracket within 3
minutes untilthe bracket is mounted