Shenzhen Front Electronics Co. Ltd. CM00080 Manual Do Utilizador

PS4 CHATBOOST

TM

 

  PS4 ChatBoost 

x 1pc

1. To attach the PS4 ChatBoost

TM 

 to the DualShock4

TM 

 controller, align the 

     headphone and EXT ports on the controller with those on the ChatBoost

TM 

 and 

     slide until it snaps into place.
2. To remove the PS4 ChatBoost

TM

       

 from the DualShock4

TM 

 

     controller, gently lift the 
     clip above the PS button 
     and slide off the 
     PS4 Chatboost

TM 

.

 Specially designed for Sony PS4 DualShock4 Controllers.

 Typical QWERTY layout Bluetooth wireless keyboard.

 Auto-connection after successful pairing.

 Built-in 1500mAh Li rechargeable battery, for extremely long working hours of the 

   ChatBoost 

TM 

can also be used as a backup power source for your PS4 DualShock 

   controller increasing your game playing time.

 Headset socket for in-game Voice Chat.

 Compatible with Sony PS4 Console & Sony PS Vita TV.

How to charge up the PS4 ChatBoost 

TM 

1500mAh built-in Li rechargeable battery:

1. Plug in a standard USB charging cable to the Micro USB “B” socket on the front of the 
     PS4 ChatBoost

TM

.

2. Connect the other end of USB charging cable to standard 5V USB socket (e.g. a USB 
     socket of a personal computer or cellphone charger).
3.The Backlight Keyboard LEDs on PS4 ChatBoost

 TM

 will light up continuously during 

    charging operation.
4. Approximately 6 hours to fully charge up the built-in battery from completely 
     empty.
5. Once the built-in battery is fully charged, Keyboard Backlight LED on the PS4 
     Chatboost

 TM 

will turn off.

6.  Please remove the USB charging cable to save power.
7.  It is recommended when first using the ChatBoost 

TM

 to fully charge it for at least 

     8 hours, this helps improve battery functionality & longevity.

The PS4 ChatBoost 

TM 

can simultaneously charge itself whilst being operational as a 

Bluetooth keyboard.

How to turn on the PS4 ChatBoost

TM

1. Slide the 3-way switch to the middle position (ON status).
2. If no indicator signal (Keyboard Backlight flashing), please perform the Bluetooth 
     pairing as stated in following section “Bluetooth pairing”.
3. If no indicator signal after you press and hold for 3 seconds on BT link button, 
    possibly the PS4 ChatBoost

TM

 is out of power, and please follow to procedures in 

    section “Charge up the built-in battery” to charge up the built-in battery first.
4. If the Keyboard Backlight LED’s blink once in every 2 seconds, the keyboard is ready 
     to be paired.

6. After successfully pairing & connected, the Keyboard Backlight LED’s on PS4 
     ChatBoost

TM

 will illuminate for 3 seconds then go off.  Pressing any key will 

     illuminate the keyboard, useful at night or in dark environments.
7. Once successfully paired the devices, next time when you turn on the PS4 
    ChatBoost

TM

 it will automatically connect to your device.

8. Due to interference in the environment, the auto-connection may fail sometimes, 
     please delete the “PS4 CHATBOOST” in the BT available list of your PS4 or PSVTV 
    device, then repeat the pairing procedures 3~5 to establish a new connection.

The PS4 ChatBoost

TM 

 also provides additional power that enables you to charge your PS4 

DualShock4 Controller while you play, this feature allows the player extended gaming 
sessions without the worry of loss of power or connection.

1. Turn the PS4 ChatBoost

TM

 switch fully to the right position (Battery Graphic), your 

    PS4 DualShock 

TM

 controller will automatically start to charge up.

2. During charging of your PS4 DualShock4

TM

 Controller you still can use the PS4

     ChatBoost

TM

 for typing.

3. Please check to the PS4 DualShock4

TM

 Controllers settings to see its charge status, 

    this can be done by holding the PS button down for 2 seconds.
4. If you are charging your PS4 Controller whilst the PS4 Console is OFF the front LED 
     bar on your PS4 DualShock4

TM

 controller will glow orange to inform you it is 

    charging.

 

 

TYPING

 To input the character/symbol printed on the button, press once on the button.

  To input the character/symbol printed on top left-hand side of the button, 

     press the “Fn1” key and the button together.

  To input the character/symbol printed on top right-hand side of the button, 

    press the “Fn2” key and the button together.

  To use the keyboard shortcuts function (e.g. Fn + C to copy, Fn + V to paste), 

    press either FN key and the corresponding button together.

Keyboard Layout _____________________________ 47 keys QWERY keyboard

Bluetooth version___________________________________Bluetooth V 3.0

Built-in lithium battery volume _____________________________1,500mAh

Charging method _____________________________ USB charging (Micro ‘B’)

Charging current ____________________________________400mA (max)

Charge up time ___________________________________ 6-7 hours (max)

Current consumption (working) ____________________________  Below 5mA

Current consumption (sleeping) ____________________________ Below 50μA

Weight _______________________________________________102 g

Product dimension (L 

x H x D) _______________146.26mm x 79.19mm x 46.80mm

 Please slide to OFF status to save power when the PS4 ChatBoost

 TM

 is not in use.  

 When the internal battery of the PS4 ChatBoost

 TM

 is under the ‘low battery status’, 

   Power/Status Keyboard Backlight LEDs will start to flash once every 10 seconds. When 
   the internal battery of the PS4 ChatBoost

 TM

 is under ‘very low battery status’, Power/ 

   Status Keyboard Backlight LEDs will start to flash five times every 10 seconds.

 The low battery signal will keep flashing when the PS4 ChatBoost

 TM

 is turned on as 

   to remind you to recharge the built-in Li battery when available.

 Low battery status will not flash when switched off. 

 Do not put metal objects inside the USB socket.

 Do not disassemble the device.

PS4 ChatBoost

 TM

 contains a Lithium Battery. On disposal, please follow safety 

    precautions according to your countries laws on the handling of toxic materials.

Do not expose the device to fire / water / microwaves (oven).

Do not pierce the device with sharp instruments. 

If fluid is seen coming out of the device, do not touch or allow it to come into contact 

with the eyes, if eye contact occurs, do not rub area, rinse with water & seek medical 

   attention immediately.

Before you can use your PS4 ChatBoost

TM

 with your PS4 or PSV TV Console, you’ll need to 

pair the 2 devices together as follows:

1. Switch ON the PS4 ChatBoost

TM 

(slide the 3- way switch to middle position).

2. Search for new Bluetooth devices on your PS4 or PSV TV Console by going 
     into Settings>Devices >Bluetooth Devices.
3. Press and hold the BT Link button for 3 seconds on the PS4 ChatBoost

TM

, the 

     keyboard backlight LEDs will start to blink.
4. Wait until “PS4 CHATBOOST” is displayed on your PS4 or PSVTV device 
    (normally within 30 seconds of searching for new devices).
5. Select the “PS4 CHATBOOST” to pair with it, input the “pin” displayed on your 
    devices screen into the keyboard & press the “Enter key” to pair. .  With the latest PSN 
    update pairing may be automatic and not require a PIN.

No light on LED indicators 
and no function on 
buttons.

Still no light on indicators 
and no function on 
buttons after turned on.

Connected the USB cable, 
but not charging up 
Controller.

Turned on the 
ChatBoost

TM

, but cannot 

type in any text.

Cannot auto-connect to 
PS4 Console.

Pressed Bluetooth pairing 
button but no response.

Turned off.

Built-in battery is total 
discharged.

Turned off.

Not performed the 
Bluetooth pairing, or 
pairing failed.

Connection been 
interrupted somehow.

Hold the pairing button 
for 3 seconds, to set PS4 
ChatBoost

TM

 into pairing 

mode.

Built-in battery is total 
discharged.

Turn on the keyboard by 
slide the On/Off switch to 
the middle position.

Re-charge the built-in 
battery.

Turn on the keyboard by 
slip the On/Off switch to 
the middle position

Perform the Bluetooth 
pairing.

Go into the PS4’s available 
Bluetooth device list, 
disconnect the 
ChatBoost

TM

 and 

re-connect it again.

Press and hold the link 
button until the Backlight 
LED’s  start flashing.

Re-charge the built-in 
battery.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:

1. This device may not cause harmful interference, and 2. This device must accept any
interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

—  Reorient or relocate the receiving antenna.
—  Increase the separation between the equipment and receiver.
—  Connect the equipment into an outlet on a circuit different from that to which 
 

the receiver is connected.

—  Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.

FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a
minimum distance of 20 centimeters between the radiator and your body.

 
Model: CM00080  

 

 

 

FCC ID: SQOCM00080

Collective Minds PS4 CHATBOOST 

TM 

model CM00080 features blue LED backlighting.

This feature is supported on all keys except for the two “Pg” keys and the “space” bar. 
No lighting on these keys is normal and the product is working correctly.

The PS4 can set the headset port to “all audio” or “chat audio”. If the output to
headphones is set to “All Audio” and the Chatboost is attached to the Dualshock 4 controller
the PS4 sees the audio connector and will transfer audio to the Chatboost as it should. All
audio will not only be heard if a headset is connected to the Headset port on the Chatboost.
If the user is using the Chatboost without headphones, the user simply changes the
headphone output to Chat only. Now game audio will be heard through the TV/Speakers.

 To change the Headphone Setting on the PS4
1.Hold The PS Button for 3 seconds
2.Select [Adjust Devices] > [Output to Headphones]
3.Choose [All Audio] or [Chat Audio]  

You can adjust settings for output to a headset or other audio device. You can also specify
whether the device receives all audio or only chat audio. The default setting is [Chat Audio].

FCC ID: 2AE8ACM00080