Que Products LLC 2ABGBFP1 Manual Do Utilizador
9
charger doesn’t disconnect from phone and power supply. We strongly advice you not to do so
for the performance and life span of your battery.
2.3 Power on
Press the power on/off key for a while to switch on/off the mobile phone, which will give you a
cue to insert SIM card if it hasn‟t been done. Then the mobile phone will automatically examine
SIM card after inserting SIM card.
Then cues will occur on the screen ordinal detailed as follows:
-- Input mobile phone password if phone unlock password has been set.
-- Input PIN1 if SIM card password has been set.
Then the phone will search network until finding available network.
*Notice: If the screen displays “Emergency”, it means you are out of the scope of service, but
you can dial Emergency Number.
2.4 The use of USB data route
The method of using USB data route: Input one of the port into the computer, and then input the
other port to the phone, after that you can transfer the data between the computer and the phone.
The phone supports the USB, you can copy and move the file between the phone and the computer
after you link the USB to the computer. You can view the information in the memory card.
Note
:
1. After the phone connected, you will find information of the USB on the computer, and then
you can read the file in my computer. If there is not information, you must check the USB
port of your mobile phone and insert it again.
2. If you connect the phone with computer when the phone is powering on, there are three
items displaying on the phone, you should select the “Mass storage”, and then you can copy
or move the file between the phone and the computer.
3. After that, you need double click the USB icon in the right corner of the computer, and then
select “stop”, now you can withdraw the USB from the computer and the phone. DO not
withdraw the USB from the computer directly, otherwise the date in the memory card will
be lost, and it can also damage the phone.
4.
You must do it on the computer which is the Windows2000 or WindowsXP.
2.5 Install and pull out T-flash card
This mobile phone supports T-flash card, which is a kind of multimedia memory card used to
increase memory of the mobile phone. It is so small that you should take cautions to install or pull
it out in order to avoid damage. The method to install/ pull out T-flash card as the follows:
1. Install the T-flash card: Power off the mobile phone, unlock T-flash card slot cover, and set
T-flash card with the metal face downward to the T-flash card slot. Then lock T-flash card
protection cover.