GSI ELECTRONICS INC. EDGERFID Manual Do Utilizador
E
Safety Characteristics and
Certification
Safety characteristics
The controllers are Safety Class I according to IEC classification and has been designed to meet the
requirements of UL 61010-1 third edition, CAN/CSA-C22.2 nº 61010-1 third edition, EN 61010-1: 2010
(Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use). It is an
Installation Category II intended for operation from a normal single phase supply.
requirements of UL 61010-1 third edition, CAN/CSA-C22.2 nº 61010-1 third edition, EN 61010-1: 2010
(Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use). It is an
Installation Category II intended for operation from a normal single phase supply.
The controllers have been tested in accordance with IEC61010-1 and have been supplied in a safe condi-
tion. This instruction manual contains some information and warnings which have to be followed by the
user to ensure safe operation and to retain the instrument in a safe condition.
tion. This instruction manual contains some information and warnings which have to be followed by the
user to ensure safe operation and to retain the instrument in a safe condition.
These Safety EU directives were followed:
2014/35/EU
The low voltage directive (LVD)
2014/30/EU
The Electromagnetic compatibility directive (EMC)
NOTE: KP-8IN-1REL, TP-8IN-1REL, TR-2IN-1REL plastic Enclosure is certified to use rigid tubing up to
1 inch.
EMC characteristics — emission standards
The controllers have been designed to meet the requirements of the EMC Directive 2014/30/EU, the FCC
directives, the Industry Canada directives. The compliance was demonstrated by meeting the test limits
of the following standards:
directives, the Industry Canada directives. The compliance was demonstrated by meeting the test limits
of the following standards:
EN 61000-6-4 (2007/A1:2011)
Emission tests levels for industrial environment
EN61326-1 (2013)
EMC product standard for Electrical Equipment for
Measurement, Control and Laboratory Use
Measurement, Control and Laboratory Use
IEC EN 60730-1 (2010):
Automatic electrical controls for household and similar
use - Part 1: General requirements - EMC
requirements
use - Part 1: General requirements - EMC
requirements
FCC part 15 Subpart B
Class A
EMC certification: ICES-001
Industrial, Scientific and Medical (ISM) Radio Fre-
quency Generators – class A
quency Generators – class A
ETSI EN 301 489-1 V1.9.2 (2011-09)
Electromagnetic compatibility and Radio spectrum
Matters (ERM); ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services; Part 1:
Common technical requirements
Matters (ERM); ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services; Part 1:
Common technical requirements
ETSI EN 301 489-3 V1.6.1 (2013-06)
Electromagnetic compatibility and Radio spectrum
Matters ERM); ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services; Part 3:
Specific conditions for Short-Range Devices (SRD)
operating on frequencies between 9 kHz and 40 GHz
Matters ERM); ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services; Part 3:
Specific conditions for Short-Range Devices (SRD)
operating on frequencies between 9 kHz and 40 GHz
895-00695
37