Baicells Technologies Co. Ltd. BRU3510 Manual Do Utilizador
14
Figure 3-6 Installation on Pole Complete
3.2.3 Install Antenna Feeder System
There are two kinds of outdoor antennas, omnidirectional outdoor antennas and
directional outdoor antennas, which installation will be introduced in the following
respectively.
3.2.3.1
Install Omnidirectional Antennas
One should pay attention to the followings in the process of installing omnidirectional
outdoor antenna:
The diameter of the pole for omnidirectional outdoor antennas is required to be 35mm
~ 50mm. A typical case is to use the 50mm diameter round-steel-made pole (with
details depending on the specific antenna type).
Make sure that the top of pole and the clamp beneath the antenna are at the same
level, after installing the omnidirectional outdoor antenna on the pole.
Make sure that the antenna is high enough to meet the coverage requirement, and
that, the antenna top falls in the safety angle of 45 degrees towards the lightening rod,
as shown in Figure 3-7.