Avantree Technology Co. Ltd. BTTC-200L Manual Do Utilizador

- 9 -

You may need to clear pairing history of New Saturn Pro if it is not working as 
expected. After that, all the paired devices information under BOTH transmitter and 
receiver mode will be erased.

Step 1. Ensure New Saturn Pro is in PAIRING MODE - While off, press MFB for 

4-6 seconds until you see the LED flash BLUE rapidly OR the LED flash
BLUE and RED alternately.

Step 2. When in paring mode, double click MFB, LED flashes BLUE and RED 
            simultaneously (like PINK) for about 2 seconds.

R

L

10m

Open air, no

obstructions

- 12 -

• Bluetooth 3.0

('5

• Bluetooth profile: A2DP and AVRCP (Receiver mode ONLY)
• Audio codec: aptX-LL, aptX, SBC
• Operating Range: Class 2, 10 meters
• Transmitter mode working time: up to 9 hours
• Receiver mode working time: up to 8 hours
• Standby time: up to 250 hours
• Charging time: around 2-3 hours
• Charging input voltage: DC 5V
• Battery: 270mAH rechargeable Li-ion battery
• Weight: Approx. 20g 

NOTE:
The working and standby times may vary when used with different mobile phones 
or other compatible Bluetooth devices, usage settings, usage styles and 
environments.

- 13 -

- 14 -

- 15 -

- 16 -

A

．Avantree New Saturn Pro

B

．3.5mm audio cable

C

．RCA audio cable

D

．3.5mm audio connector

E

．USB charging cable

F

．User manual

G

．Quick guide

H

．Warranty card

- 2 -

- 3 -

Firstly, please ensure the New Saturn Pro is off, then push the switch button to the 
mode (Transmitter or Receiver) that you want.

Turn On: Press and hold the MFB button for about 2 seconds until the blue LED is on 

for 1 second.

Turn Off: Press and hold the MFB button for about 2 seconds until the red LED is on 

for 1 second and then goes off.

Before pairing, please make sure your Bluetooth receiver device supports true stereo 
audio (such as Bluetooth stereo headset Avantree Audition Pro or Bluetooth speaker 
Torpedo Plus).

A. Ensure New Saturn Pro is off, then slide the switch button to Transmitter mode.
B. Put New Saturn Pro into pairing mode by pressing and holding the MFB for 

around 4-6 seconds until LED flashes blue rapidly.

C. Put your Bluetooth headphones/speaker/other receiving device into pairing 

mode.

D. Keep them within 1 meter, wait until LEDs lights BLUE for 1 second.
E. Connect New Saturn Pro to the audio output port of the audio source such as

your TV, iPod etc. via the audio cable.

- 4 -

A. Put one New Saturn Pro into Transmitter Mode, press and hold MFB button until 

LED flashes blue rapidly;

B. Put another New Saturn Pro into Receiver Mode, press and hold MFB button 

until LED flashes red and blue alternatively.

C. Keep them within 1 meter and wait for around 5-7 seconds, until the LED lights 
     on BLUE 1 second, which indicates a successful connection.
D. Connect the transmitter to an audio source such as a TV or MP3 player and the 

receiver to the receiving device, such as a speaker or headphones.

Note: If you always use them as a pair, we have a pre-paired set for you, which is 
          truly plug & play. Please search “Avantree Lock” for it.

- 7 -

Once powered on, New Saturn Pro will reconnect with the last connected device 
automatically within 5 seconds. If not, you can press the MFB once to stimulate the 
process.

NOTE:
When it is NOT charging, New Saturn Pro will automatically power off if no devices 
can be connected within 30 minutes. 

Please make sure there are no obstacles between receiver and transmitter, and 
place the two devices on the same side of your body if you are wearing them. 

A. Ensure New Saturn Pro is off, then slide the switch button to Receiver mode.
B. Put New Saturn Pro into pairing mode by pressing and holding the MFB for around 
     4–6 seconds till Blue and Red LED light flashes alternatively.
C. Enable Bluetooth on your smartphone / tablet / notebook, search for 'Avantree 

6DWXUQ3UR DQGFOLFN³FRQQHFW´(JL3KRQHWDS 6HWWLQJV ĺ %OXHWRRWK ĺ 2Q

D. Connect New Saturn Pro to the audio input port of home hi-fi stereo system via 

the included 3.5mm audio cable.

NOTE:
1. The pairing mode will last 3 minutes. The receiver will turn off if no devices can be

connected within 3 minutes.

2. Please do not change Transmitter or Receiver mode after powering on New 

Saturn Pro. When you need to pair another device, please turn off the device first, 
then choose the mode you need.

3. When New Saturn Pro is used as a receiver, you can short press MFB to control 

pause/play of music.

www.avantree.com

(R[KZUUZN'[JOU:XGTYSOZZKX8KIKO\KXOT

FCC ID: 

$,7)%77&/

FCC:
This device complies with part 15 of the FCC Rules. Operation is subject to the 
condition that this device does not cause harmful interference (1) this device 
may not cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause undesired 
operation. Changes or modifications not expressly approved by the party 
responsible for compliance could void the user's authority to operate the 
equipment.

NOTE: This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are 

designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in accordance with the instructions, 
may cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television reception, which 
can be determined by turning the equipment off and on, the user is encouraged to 
try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
FCC ID: 

$,7)%77&/

 To maintain compliance with FCC’s RF Exposure guidelines, This equipment 
should be installed and operated with minimum distance between 20cm the 
radiator your body: Use only the supplied antenna.

• USA / CANADA +1 800 232 2078 (EN, PST  9am-5pm)
• UK: +44 20 8068 2023 (EN, CET 10am-7pm)
• Germany: +49 32221097297 (DE, CET 10am-7pm)
• Italy: +39 06 9480 3330 (IT, CET 9:30am-12:30am)
• France: + 33 176340312 (FR, CET 8am-10am)
• Spain: + 34 931786261 (ES, CET 2:30pm-4:30pm)
• Asia: + 86 755 8228 1190 / 7741-7746 (CN & EN, BJT  9am-5pm)
• Australia: + 61 2 8310 9897 (CN & EN, BJT  9am-5pm)

• 100+ Step by step video Guide – youtube.com/avantree/playlists
• 300+ FAQ: support.avantree.com

(Response Time: 4-24h, excl. holidays)

NOTE:
1. During pairing mode, New Saturn Pro will turn off if no devices can be paired and

connected within 3 minutes.

2. When you change Transmitter or Receiver mode running on battery, New Saturn 

Pro will automatically power off. Please restart it manually for use.

3. When you need to pair another device, please turn off the device first, then choose 

the mode you need. 

- 5 -

- 6 -

When the LED flashes red, you should recharge the device. It normally takes about 2 
hours to fully charge the battery. The LED will stay red when charging and will turn off 
when charging is complete.

Charging requirement:
You can connect New Saturn Pro via the supplied micro USB cable to your own USB 
chargers (wall charger/travel charger/car charger, etc.) with 5V/500mA-1A or PC USB 
port. It’s ok to use most mobile phone chargers on the market.

- 10 -

- 11 -

B

C

D

- 1 -

A

E

F

www.avantree.com

(R[KZUUZN'[JOU:XGTYSOZZKX8KIKO\KX9KZ

- 8 -

Z-PKMN-TC200L-F-V1

www.avantree.com

support@avantree.com

More FAQs on support.avantree.com
Video user guide: Search “Avantree Saturn Pro” on Youtube.com
Telephone support refer to http://www.avantree.com/contact-us
Email support: support@avantree.com

Transmitter / Receiver switch 

Micro USB cable

Charge from a wall charger

Charge from PC

1.

Features & aptX Low Latency

2.

Product Overview & Package Content

3.

Power On / Off

4.

Use as a Transmitter 

5.

Use as a Receiver

6.

Reconnection

7.

Get Maximum Stable Range

8.

Charging

9.

Using 2 New Saturn Pros as a Pair

10. Clear Pairing History

11. LED Indicator

12. Product Specification

13. Declaration of Conformity

1

11

12

13

14

10

8

8

7

5

3

2

3

Transmitter

Press MFB 4s, 
LED blinks blue
quickly

Get headset 
into pairing 
mode

Pairing

Transmitter Mode

Wait for 5~15secs, both LEDs blink 
blue slowly

Connect to TV’s 
audio output port

Enjoy

Connected

Mode

1M

Transmitter

Receiver

Receiver

Avantree Saturn Pro

Search & Connected

Enjoy

Press MFB 4s, LED blinks blue
and red alternatively

Enter pairing mode

Receiver Mode

Connected

Connected

Connect to speaker’s 
audio input port.

1M

Transmitter

Receiver

Use two Saturn Pros as a pair 

Connect
to TV

Connected

Press MFB 4s, 
LED blinks blue 
and red

Press MFB 4s, 
LED blinks
blue and red

Pairing

Transmitter Mode

Wait for 5s until both LEDs blink 
blue slowly

Connect
to headset

Enjoy

Receiver Mode

1M

Transmitter

Receiver

Transmitter

Receiver

Pairing mode under Transmitter mode. 
Lasts for 3 minutes

LED flashes BLUE rapidly

Pairing mode under Receiver mode. 
Lasts for 3 minutes

LED flashes BLUE then RED alternatively

Standby mode. Not connected to any
other device

LED flashes BLUE once every second

Device connected with SBC codec

Device connected with aptX codec

LED flashes BLUE twice every 5 seconds

Device connected with aptX LOW 
LATENCY codec

Low battery

LED flashes RED

The Avantree New Saturn Pro is a 2-in-1 Bluetooth receiver and transmitter incorporating the latest 
"aptX Low Latency" codec for high quality Bluetooth audio streaming.

The New Saturn Pro is simple to use and enables any audio device to transmit and receive. For 
example, it can be used to enable a phone to transmit music to a home stereo system, or to allow a 
TV to transmit audio to a Bluetooth enabled speaker system or headphones.

With its low latency codec, the New Saturn Pro is suitable for online gaming, TV 
audio transmission, real-time music recording, etc.

To take advantage of the better performance of the aptX Low Latency Codec, Bluetooth device must 
support the same codec. If the Bluetooth device only supports the standard aptX codec, or the SBC 
one, those codecs will be used instead.

aptX Low Latency codec 

~

40ms

aptX codec 

~

70ms

SBC codec (most standard Bluetooth audio)            

~

220ms

G

H

2U]2GZKTI_(R[KZUUZN'JGVZKX

Scan for video user guide 

English      
Deutsch 
Français 
Italiano   
Español

 06/10

01/05

21/25

16/20

 11/15

----- 

----- 

----- 
----- 
----- 

LED flashes WHITE once every 5 seconds

LED flashes WHITE twice every 5 seconds