GUANGZHOU NOVO SUN SHADING TECHNIQUE CO. LTD. MD30964 Manual Do Utilizador
*Note: If you want to reset the limit position.Again operate Up/Down limit set up step.
**Note: Different motor have different prompting mode,please refer detail with specification.
Switch key function for the code setted receiver (motor),after the switch ,receiver (motor) rotate little if
you press the Up or Down key on the transmitter (N09~N16 without this function )
you press the Up or Down key on the transmitter (N09~N16 without this function )
Inching/Continuous move mode change:
Up/Down limit setting:
This function is only applicable to electronic limit function of the receiver(motor)
Up/Down limit means curtain run Up/run Down can reach high/low position.
Match Code:
The transmitter must match code with receiver, and then the receiver can be remote control by transmitter.
Product Features
F
Company reserves the right to change product design and specifications without prior notice then ,
photos are for reference only.
photos are for reference only.
A/2 H12020
A3 Touch Screen Free Stick-on
Transmitter use 868 MHZ radio
frequency,Remote-controlled
distance is above 100m(visual-
range), two reinforced concrete
wall at least 30 m.
868 MHz radio frequency with a
strong anti-jamming capability,
high receiving sensitivity, stable
center frequency and convenient
debugging, etc function in
wireless communications.
Transmitter use 868 MHZ radio
frequency,Remote-controlled
distance is above 100m(visual-
range), two reinforced concrete
wall at least 30 m.
868 MHz radio frequency with a
strong anti-jamming capability,
high receiving sensitivity, stable
center frequency and convenient
debugging, etc function in
wireless communications.
K
Key functions
Enter setup
mode
mode
Sirens
prompt
tone
prompt
tone
Motor rotate
front and
opposite
once
front and
opposite
once
I
ntermittent
promt tone
A prompt
sound
sound
Motor rotate
front and
opposite
once
front and
opposite
once
Motor run
Down
Down
A prompt
sound
sound
Pressing Up/
Down/Stop Key
to adjust curtain
Down/Stop Key
to adjust curtain
Finish setting
the up limit
position
the up limit
position
Finish setting
the down limit
position
the down limit
position
Motor run up
Motor rotate
front and
opposite
once
front and
opposite
once
Intermittent
promt tone
promt tone
A3 Single channel Touch Screen
Free Stick-on Transmitter
A3 Double channel Touch Screen
Free Stick-on Transmitter
Powerful magnet
On the back of the transmitter
发
Install Sketch Map & Change the battery
I
Powerful
magnet
Bracket
Screw
Wall
Screw hole
Screw hole
On the back of the
transmitter
The cover can be
easily pried up by a
screwdriver, then
change the battery.
easily pried up by a
screwdriver, then
change the battery.
Three installation methods :
1. Fix the bracket to the right position
with a screw, it can be adsorbed by
build-in powerful magnet.(as the picture)
2. Open the surface cover, fix the bottom
cover to the right position with screw,
then close the surface cover.
3. Stick Double-sided foam tape on the
bottom cover, then stick to the right
position.
with a screw, it can be adsorbed by
build-in powerful magnet.(as the picture)
2. Open the surface cover, fix the bottom
cover to the right position with screw,
then close the surface cover.
3. Stick Double-sided foam tape on the
bottom cover, then stick to the right
position.
Change the battery
Pressing Up/
Down/Stop Key
to adjust curtain
Down/Stop Key
to adjust curtain
Working power supply:
3V button cell(CR2430)
868MHz
Working frequency:
10mW
Transmit power:
Working Temperature:
Working Temperature:
-20℃~70℃
(Max90%)
Working Humidity:
Note: electronic products need
dampproof , can not use in high
humidity with a long time.
dampproof , can not use in high
humidity with a long time.
H
S
K
868MHz radio frequency has
high sensitivity
high sensitivity
Flat Panel High hardness surface,
excellent transparenly
excellent transparenly
Touch screen fashion trend
J
Jogging move and continuous
move control individually
move control individually
C
Powerful magnet in back, stick
to the wall conveniently
to the wall conveniently
P
Programming operation method
(FOR EXAMPLE:
E24-EL-SA-1
VENETIAN MOTOR)
Motor rotate
front and
opposite once
front and
opposite once
I
ntermittent
promt tone
Motor rotate
front and
opposite
once
front and
opposite
once
1. Choose the channel you
want to set
want to set
2. Press the [SET Key] on
the motor
the motor
3. When the motor stop with in 10s ,press
[Up+Stop+Down] Key at the same time.
[Up+Stop+Down] Key at the same time.
Motor rotate
front and
opposite
once
front and
opposite
once
DOWN
UP
LEFT
1. Choose the channel you
want to set
want to set
2. Press [Up+Stop+Down] Key
at the same time about 10s
at the same time about 10s
3. When the motor stop within 10s,
match code on another transmitter.
match code on another transmitter.
Motor rotate
front and
opposite
once
front and
opposite
once
I
ntermittent
promt tone
Motor rotate
front and
opposite
once
front and
opposite
once
2. Press [Up+Down] Key at
the same time about 10s
the same time about 10s
3. When the motor stop within 10s,
Press [Stop]Key about 5s
Press [Stop]Key about 5s
1. Choose the channel you
want to set
want to set
Change the direction:
Change the direction for the code setted receiver .for example, before direction changed, if you press the Up Key on the
Transmitter the curtain will go downwards , while after direction changed , curtain will go upwards when you press the Up Key !
Transmitter the curtain will go downwards , while after direction changed , curtain will go upwards when you press the Up Key !
Channel copy:
Increased another transmitter for the setting done transmitter, and the receiver can be control by multiple transmitter.
Motor rotate
front and
opposite
once
front and
opposite
once
Intermittent
promt tone
promt tone
Motor rotate
front and
opposite
once
front and
opposite
once
9.Pressing the [Stop+Down] Key at
the same time to comfirm down
limit position.
the same time to comfirm down
limit position.
10.Pressing [Stop] Key about 5s
with in 20s ,Saving limit position.
with in 20s ,Saving limit position.
2、Press
]
[Up Key+Down Key
about 10s;
3. When the motor stop
with in 10s ,press [Down] Key
about 5s.
with in 10s ,press [Down] Key
about 5s.
4.Pressing [Up] Key within 20s,
Setting up limit position,
Warning tone close.
Setting up limit position,
Warning tone close.
1.Pressing the [Channel Key]
choose need to set the limit
channel.
choose need to set the limit
channel.
7.Pressing [Down] Key
within 20s. Setting down
limit.
within 20s. Setting down
limit.
6.Pressing the [Stop+Up] Key
to comfirm up limit value at
the same time.
to comfirm up limit value at
the same time.
5、Pressing the [Up/Down] Key to
let blind move,stop it in a suitable
position by pressing [Stop] Key,
which is called uplimit position
let blind move,stop it in a suitable
position by pressing [Stop] Key,
which is called uplimit position
8、Pressing the [Up/Down] Key to
let blind move,stop it in a suitable
position by pressing [Stop] Key ,
which is called down limit position.
let blind move,stop it in a suitable
position by pressing [Stop] Key ,
which is called down limit position.
1. Choose the channel you want
to set.
to set.
2. Press the [Up+Down] Key
about 10s at the same time.
about 10s at the same time.
3. Press the [Up] Key around 5s
within 10s after the motor stop.
within 10s after the motor stop.
Powerful
magnet
A3 Single/Double Channel Touch Screen Free Stick-on
Transmitter Operating Manual
Up Key
Down Key
Indicator
light
Stop Key
Channel 2
Channel 1
Down
Up
Stop
Down
Up
Stop
Down
Up
Down
Up
Down
Stop
Up
Stop
Up
Stop
Down
Down
Stop
Channel 2
Channel 1
Channel 2
Channel 1
Channel 2
Channel 1
Channel 2
Channel 1
Down
Up
Up
Stop
Stop
* Repeat operating match code procedure once can delete the code (Delete code on transmitter).
Note: battery consumption,working
life is half a year.
life is half a year.