Shenzhen city global development Electronic Co. LTD. N3 Manual Do Utilizador

 
 

 

3/5 

 

 

A host up to four controllers simultaneously with (including wired and wireless controller) connection, 

each handle (and the host) Of the ring will light up a controller instructions. Before you connect X360 

2.4G wireless handle, you must have at least one unused (not illuminated) controller instructions. If 

you want to disconnect the wireless hand with the host, press and hold the X360 neutral 2.4G 

wireless hand button, and then close the handle. 

 
X360 neutral

 

2.4G

 

wireless

 

hand button and power switch indicator 

  (1) 

   

Press and hold     X 360     Button to turn on or off the host and handle; and when the host 

is turned on by pressing this button, you can access XBOX containing the various options pop-up 

menu. 

  (2) 

   

X 360 in the controller buttons and power switch surrounded by a host halo. When a 

connection with the host controller, the aura of a block will light green to indicate that the 

handle is connected. For example, when you first handle the host connection, the upper 

left corner of the block will light up: 

 

RF 2.4G

 

connection for use: 

 

Dongle end connection status: 

(1) 

Flash (2Hz) - This state can accept any Remote pairing. 

 
(2) And the Remote side within 3 seconds completely lost, will enter the connection mode to wait 

for the Remote side to connect.