Circuit Design Inc. NK24Y Manual Do Utilizador
OPERATION GUIDE
OG_NK24Y_v08e
Circuit Design, Inc.
11
Regulatory compliance information
Regulatory Statement for FCC
Instructions to the final system integrators
The final system integrator must ensure there is no instruction provided in the user manual or customer
documentation indicating how to install or remove the transmitter module.
This module should be installed in the host device according to the interface specification.
documentation indicating how to install or remove the transmitter module.
This module should be installed in the host device according to the interface specification.
Labeling
FCC ID:
V9X
-NK24Y
The proposed FCC ID label format is to be placed on the module. If FCC ID is not visible when the
module is installed into the system, “Contains FCC ID: V9X-NK24Y shall be placed on the outside of final
host system.
module is installed into the system, “Contains FCC ID: V9X-NK24Y shall be placed on the outside of final
host system.
The following information must be indicated on the host device of this module.
*If it is difficult to describe this statement on the host product due to the size, please describe in the
User's manual.
User's manual.
The following statements or equivalent must be described on the user manual of the host device
of this module;
of this module;
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Caution: Any changes or modifications not expressly approved by the party responsible for product
compliance could void the user's authority to operate the equipment.
compliance could void the user's authority to operate the equipment.
Caution: Exposure to radio frequency radiation
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment
has very low levels of RF energy that are deemed to comply without testing of specific
absorption rate(SAR).
This transmitter must not be co-located or operated in conjunction with any other antenna or
transmitter.
transmitter.