SEGI LIMITED RCD300-2WSS Manual Do Utilizador
Firstech, LLC. | 1
8102REUCL000500 // FT-2WLCD-S Guide REV1
QUICK START CARD
2 WAY LCD REMOTES
Tap the Lock Button to lock your doors and/or arm your vehicle. Hold this button for
2.5 seconds to activate Button Lock. “Hold” will flash on the LCD when you press
any button. Hold this button for 3.5 seconds to activate panic/vehicle locater.
Tap the Unlock Button to unlock your doors and/or disarm your vehicle.
Hold this button for 2.5 seconds to pop your trunk. If not equipped, ask your
Tap the Unlock Button to unlock your doors and/or disarm your vehicle.
Hold this button for 2.5 seconds to pop your trunk. If not equipped, ask your
Authorized Dealer for details on how to get it.
Hold this button for 2.5 seconds to start your vehicle. Your remote will receive a
Hold this button for 2.5 seconds to start your vehicle. Your remote will receive a
page back alert and run time countdown timer will start. If enabled, double tapping
this button will reset your remote start run time or turbo timer. Status: Tapping this
button will activate vehicle status check. The first tap will check temperature inside
your vehicle, second, battery voltage and third, remote battery voltage. Repeat and
your vehicle will shut off.
Auxiliary 1: Tap the Start Button and then tap the Trunk release button.
Auxiliary 1: Tap the Start Button and then tap the Trunk release button.
Auxiliary 2: Tap the Start Button, Press and hold Trunk + Start Buttons for 2.5
seconds and then tap the Trunk Button.
Tap these two buttons at the same time to turn Valet Mode off. Turn Ignition On and
tap buttons to turn on. Hold them for 2.5 seconds to turn your FT-DAS or Shock
Sensor on or off.
Tap these two buttons at the same time to turn the horn or siren chirps on or off.
Tap these two buttons to activate Passive locking/arming. Your system will lock/arm
Tap these two buttons at the same time to turn the horn or siren chirps on or off.
Tap these two buttons to activate Passive locking/arming. Your system will lock/arm
after 30 seconds if enabled. Hold these two buttons for 2.5 seconds to enter the
Remote Option Menu.
Valet Mode: If your remote start
is not working, you may be in
Valet Mode. Your parking lights
will also not flash. Your doors
will still lock and unlock. To exit
Valet Mode, tap the Lock and
Trunk buttons or turn the Ignition
On and then tap the foot brake
10 times or reprogram your
remote(s). Holding the Lock and
Trunk buttons for 2.5 seconds will
turn your FT-DAS or Shock Sensor
on or off.
is not working, you may be in
Valet Mode. Your parking lights
will also not flash. Your doors
will still lock and unlock. To exit
Valet Mode, tap the Lock and
Trunk buttons or turn the Ignition
On and then tap the foot brake
10 times or reprogram your
remote(s). Holding the Lock and
Trunk buttons for 2.5 seconds will
turn your FT-DAS or Shock Sensor
on or off.