Transition Networks C6210-3029-B2 Folheto
Transition Networks, Inc.
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
tel: 952.941.7600 / 800.526.9267
fax: 952.941.2322
info@transition.com
http://www.transition.com
fax: 952.941.2322
info@transition.com
http://www.transition.com
©2011 Transition Networks, Inc.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
Specifications
Standards
ANSI, ITU-TS, ETSI, G.823 for jitter tolerance,
G.755 for loss of signal
G.755 for loss of signal
Coax Connectors
75 ohm coax
Fiber Connectors
SFP: LC connector Uses standard 100BASE-X/OC-3 SFP
Fixed Optics: ST or SC connector
Fixed Optics: ST or SC connector
Data Rates
DS3/T3 = 44.7Mbps; E3 = 34.4Mbps
Status LEDs
Power, Coax link status, coax loop-back status, AIS on coax
link; Fiber link status, fiber loop-back status, AIS on fiber link
link; Fiber link status, fiber loop-back status, AIS on fiber link
Dimensions
W: 0.86” [22 mm]; D: 6.5” [165 mm]; H: 3.4” [86 mm]
Power Consumption
2.5 Watts
Environment
See chassis specifications
Shipping Weight
1 lb. [.45 kg]
Regulatory Compliance
CISPR/EN55022 Class A; FCC Class A; CE Mark
MTBF
Greater than 250,000 hours (MIL-HDBD-217F)
Greater than 687,000 hours (Bellcore)
Greater than 687,000 hours (Bellcore)
Warranty
Lifetime
DS3 – T3/E3 Coax to Fiber Network Interface Device
Features
AIS (Alarm Indication Signal)
Coax Line Build Out
Switch selectable for DS3/T3 or E3
Remote firmware upgrade
Loopback – Coax and Fiber
LEDs for immediate visual status]
Supports dual or single fiber
Supports multimode and single mode
fiber at a variety of distances
Supports CWDM SFPs
SNMP management when used with
ION chassis and management module
Remote standalone can be managed
by local peer
The DS3 – T3/E3 copper to fiber network
interface device (NID) provides a solution
for those users that need to extend DS3
connections over fiber.
interface device (NID) provides a solution
for those users that need to extend DS3
connections over fiber.
The DS3 – T3/E3s supports Small Form
Pluggable (SFP) transceivers to support a
variety of fiber types, distances and
wavelengths to provide maximum flexi-
bility across a variety of network topolo-
gies. The use of Coarse Wave Division
Multiplexing (CWDM) SFPs can be utilized
to further increase the bandwidth capac-
ity of the fiber infrastructure.
Pluggable (SFP) transceivers to support a
variety of fiber types, distances and
wavelengths to provide maximum flexi-
bility across a variety of network topolo-
gies. The use of Coarse Wave Division
Multiplexing (CWDM) SFPs can be utilized
to further increase the bandwidth capac-
ity of the fiber infrastructure.
The DS3 – T3/E3 NID must be used in
pairs. A typical installation will include a
chassis card installed in the ION Platform
locally and a stand-alone device installed
at the remote location.
pairs. A typical installation will include a
chassis card installed in the ION Platform
locally and a stand-alone device installed
at the remote location.
Integrate Voice & Data on Fiber Network
C6210 Series
slide-in-module for the ion platform
DS3 – T3/E3
The ION Platform
Ordering Information
C6210-3011
(2) Coax (BNC)
to 1300nm multimode (ST)
[2 km/ 1.2 mi.] Link Budget: 11.0 dB
C6210-3013
(2) Coax (BNC)
to 1300nm multimode (SC)
[2 km/ 1.2 mi.] Link Budget: 11.0 dB
C6210-3014
(2) Coax (BNC)
to 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
C6210-3015
(2) Coax (BNC)
to 1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 29.0 dB
C6210-3016
(2) Coax (BNC)
to 1310nm single mode (SC)
[60 km/37.3 mi.] Link Budget: 32.0 dB
C6210-3017
(2) Coax (BNC)
to 1550nm single mode (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
C6210-3040
(2) Coax (BNC)
to SFP slot (empty)
Single Fiber Products
Recommended use in pairs
C6210-3029-A1
(2) Coax (BNC)
to 1310nm TX/1550nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
C6210-3029-A2
(2) Coax (BNC)
to 1550nm TX/1310nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
C6210-3029-B1
(2) Coax (BNC)
to 1310nm TX/1550nm RX single fiber
single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
C6210-3029-B2
(2) Coax (BNC)
to 1550nm TX/1310nm RX single fiber
single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB