AMD Sempron 2800 box S754 SDA2800BABOX/SDC2800BABOX Manual Do Utilizador
Códigos do produto
SDA2800BABOX/SDC2800BABOX
Chapter 10
Pin Descriptions
59
31993A-1 September 2004
AMD Sempron™ Processor Model 10 Data Sheet
AMD Preliminary Information
10.2
Pin List
Table 20 on page 60 cross-references Socket A pin location to
signal name.
signal name.
The “L” (Level) column shows the electrical specification for
this pin. “P” indicates a push-pull mode driven by a single
source. “O” indicates open-drain mode that allows devices to
share the pin.
this pin. “P” indicates a push-pull mode driven by a single
source. “O” indicates open-drain mode that allows devices to
share the pin.
Note: The AMD Sempron processor supports push-pull drivers. For
more information, see “Push-Pull (PP) Drivers” on page 6.
The “P” (Port) column indicates if this signal is an input (I),
output (O), or bidirectional (B) signal. The “R” (Reference)
column indicates if this signal should be referenced to VSS (G)
or VCC_CORE (P) planes for the purpose of signal routing with
respect to the current return paths.
output (O), or bidirectional (B) signal. The “R” (Reference)
column indicates if this signal should be referenced to VSS (G)
or VCC_CORE (P) planes for the purpose of signal routing with
respect to the current return paths.