Telegärtner H06000A0001 Manual Do Utilizador
4
RJ45 Components
A
Connection Modules Cat.7
Telegärtner Karl Gärtner GmbH • Tel: +49-(0)7157 / 1 25-100 • www.telegaertner.com
123
The VM 8-8 modules are employed as connections/extensions
of commercially available, shielded/unshielded twisted-pair
installation cables (Cat.5e/Cat.6/Cat.7) in the following ap-
plications: damaged cables, cable extensions, cable rerouting.
When VM 8-8 modules are used, the cable segments in a
structured wiring system do not need to be laid out again. This
of commercially available, shielded/unshielded twisted-pair
installation cables (Cat.5e/Cat.6/Cat.7) in the following ap-
plications: damaged cables, cable extensions, cable rerouting.
When VM 8-8 modules are used, the cable segments in a
structured wiring system do not need to be laid out again. This
reduces the expenses for alterations and the overall costs to a
minimum. Depending on the connection module type, up to 12
incoming and 12 outgoing 8-wire cables can be permanently
connected together without any significant reduction in the
transmission characteristics or limitation of the maximum link
lengths.
minimum. Depending on the connection module type, up to 12
incoming and 12 outgoing 8-wire cables can be permanently
connected together without any significant reduction in the
transmission characteristics or limitation of the maximum link
lengths.
Performance Characteristics
• connection via LSA Plus terminals on a common PCB
• colour coding in acc. with EIA/TIA 568A and B
• connection of 4-pair shielded/unshielded installation cables
• colour coding in acc. with EIA/TIA 568A and B
• connection of 4-pair shielded/unshielded installation cables
from AWG 24-22
• pairs can be brought directly up to the terminal without
untwisting the pairs
• secure shielded contact using screw-on terminals directly
on the PCB
• variable cable feeds
• separate cable strain relief using commercially
• separate cable strain relief using commercially
available cable ties
• tool-free installation of shielding cover made of
stainless steel (19“ and on-wall mounted version)
• surface mount (AP) type: incoming and outgoing cables
in the same direction
• surface mount, 19“, and basic (for loose connection)
version: incoming and outgoing cables offset by 180
degrees
degrees
• ground connection option directly on the PCB (M4 screw)
• EMC compatible in accordance with EN 50081-2 and
• EMC compatible in accordance with EN 50081-2 and
50082-2
VM 8-8 Cat.7
6x VM 8-8 Cat.7
12x VM 8-8 Cat.7
Mechanical Characteristics
Material: housing
ABS non halogen,
UL94 V1 black
UL94 V1 black
sheet steel 1 mm, powder-laminated, light grey RAL 7035
Material: shield
copper conductive lacquer
stainless sheet steel
stainless sheet steel
Material: PCB
FR4
FR4
FR4
Material: PCB finish
Cu 35/35 chem. tinned
Cu 35/35 chem. tinned
Cu 35/35 chem. tinned
Material: cable ties
PA 6.6 UL94 V2
PA6.6 UL94 V2
PA 6.6 UL94 V2
LSA Plus: Cu conductor diameter
0,40 - 0,65 mm
AWG 26/1 - AWG 22/1
AWG 26/1 - AWG 22/1
0,40 - 0,65 mm
AWG 26/1 - AWG 22/1
AWG 26/1 - AWG 22/1
0,40 - 0,65 mm
AWG 26/1 - AWG 22/1
AWG 26/1 - AWG 22/1
LSA Plus: Wire diameter
0,7 - 1,7 mm
0,7 - 1,7 mm
0,7 - 1,7 mm
Climatic Characteristics
Tested / classified in accordance with DIN IEC 60068-1
25/070/21
25/070/21
25/070/21
Electrical Characteristics
Working current at 50° C
1 A
1 A
1 A
Voltage proof: contact-contact
≥ 1000 V=
≥ 1000 V=
≥ 1000 V=
Voltage proof: contact-shield
≥ 1500 V=
≥ 1500 V=
≥ 1500 V=
Transmission Chracteristics
default values
typ. values
default values
typ. values
default values
typ. values
Next: at 100 MHz
72.4 dB min.
82.3 dB
72,4 dB min.
82,3 dB
72,4 dB min.
82,3 dB
Next: at 250 MHz
66.4 dB min.
77.1 dB
66,4 dB min.
77,1 dB
66,4 dB min.
77,1 dB
Next: at 600 MHz
60.7 dB min.
67.1 dB
60,7 dB min.
67,1 dB
60,7 dB min.
67,1 dB
Return loss: at 100 MHz
24 dB min.
28.9 dB
24 dB min.
28,9 dB
24 dB min.
28,9 dB
Return loss: at 250 MHz
16 dB min.
18.7 dB
16 dB min.
18,7 dB
16 dB min.
18,7 dB
Return loss: at 600 MHz
8.4 dB min.
17.9 dB
8,4 dB min.
17,9 dB
8,4 dB min.
17,9 dB
Insertion loss: at 100 MHz
0.2 dB max.
0.05 dB
0,2 dB max.
0,05 dB
0,2 dB max.
0,05 dB
Insertion loss: at 250 MHz
0.32 dB max.
0.1 dB
0,32 dB max.
0,1 dB
0,32 dB max.
0,1 dB
Insertion loss: at 600 MHz
0.49 dB max.
0.3 dB
0,49 dB max.
0,3 dB
0,49 dB max.
0,3 dB
Contact Resistance
200 mΩ max.
< 10 mΩ
200 mΩ max.
< 10 mΩ
200 mΩ max.
< 10 mΩ
Cat.7
Category 7 acc. to ISO/IEC 11801; EN 50173-1