JVC HMHDS4 Manual Do Utilizador

Página de 104
Filename [HM-HDS4EK_04Basic.fm]
Masterpage:Left
42
Page 42
April 22, 2003 10:12 pm
RECORDING/PLAYBACK ON VHS DECK (cont.)
Recording Features
Record One Programme While 
Watching Another
Once recording is in progress, all you need to do is to set 
the channel controls on the TV for the station you wish to 
view.
● The programme selected with the TV’s channel controls 
appears on the TV screen, while the one selected with the 
recorder’s VCR PR buttons is recorded on the tape.
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours 
(selectable in 30-min. increments), and shuts the recorder off 
after recording is finished.
1
Start recording.
Press 
7
 on the recorder.
2
Engage the ITR mode.
Press 
7
 again. “
7
” blinks and “0:30” appears on the front 
display panel.
3
Set the recording duration.
If you want to record for more than 30 minutes, press 
7
 
to extend the time. Each press extends recording time by 
30 minutes.
NOTES:
● You can only perform ITR using the 7 button on the recorder’s 
front panel.
● When the end of the tape is reached during instant timer 
recording, the cassette is ejected, then the recorder is powered 
off automatically.
● Turn on the TV and select the AV mode.
● Slide TV/CABLE/SAT switch to the right.
● If the recorder is turned on with HDD deck selected, 
there may be about 30 seconds’ delay in starting to 
show pictures on the screen.
Recording Resume Function
If there is a power outage during recording, Instant Timer 
Recording (in the right column) or timer recording 
(
pg. 46, 48), the recording will resume automatically 
when power is restored to the recorder unless the recorder’s 
memory backup has expired.
Accidental erasure prevention
To prevent accidental recording on a 
recorded cassette, remove its safety 
tab. To record on it later, cover the 
hole with adhesive tape.
Record safety tab
HM-HDS4EK.book  Page 42  Tuesday, April 22, 2003  10:14 PM