Allied Telesis AT-8100L-8 AT-8100L-8-50 Manual Do Utilizador
Códigos do produto
AT-8100L-8-50
8100L Series
| Layer 2–4 Fast Ethernet Standalone Switches
Simplifying the Network
AutoQoS with the 8100L Series enables
a switch administrator to enter one
command to enable all the appropriate
features for the recommended QoS
settings on edge and uplink port so this
minimizes the complexity and speeding
up the QoS deployment over the
network.
command to enable all the appropriate
features for the recommended QoS
settings on edge and uplink port so this
minimizes the complexity and speeding
up the QoS deployment over the
network.
Environmentally Friendly
In keeping with our commitment to
environmentally friendly processes and
products, the 8100 Series is designed
to be green from the ground up, with
reduced power consumption and
minimal hazardous waste.
environmentally friendly processes and
products, the 8100 Series is designed
to be green from the ground up, with
reduced power consumption and
minimal hazardous waste.
The use of highly recyclable metal, a
combination of green production
processes, earth friendly packaging, high
efficiency power supplies and effective
power management deliver both cost
savings and a reduced carbon footprint
for the user.
processes, earth friendly packaging, high
efficiency power supplies and effective
power management deliver both cost
savings and a reduced carbon footprint
for the user.
Access Control Lists
Access Control Lists work as filters that
can enable inspection and classification
of incoming frames. Specific actions can
then be performed on these defined
frames to more effectively manage the
network traffic at Layer 2 through Layer
of incoming frames. Specific actions can
then be performed on these defined
frames to more effectively manage the
network traffic at Layer 2 through Layer
4. ACLs are typically used as a security
mechanism, either permitting or denying
entry for packets on specific switch
ports.
entry for packets on specific switch
ports.
Layer 3 Routing
The switch provides static IPv4 routing
at the edge of the network as well as
support for RIPv1 and RIPv2.
support for RIPv1 and RIPv2.
Power over Ethernet
The AT-8100L/8POE model also
supports PoE+ (IEEE 802.3at), delivering
up to 30W per port.
up to 30W per port.
Power over Ethernet allows users to
network and power a device using a
single Ethernet cable, thus eliminating
the need for additional power outlets
and simplifying the network installation.
network and power a device using a
single Ethernet cable, thus eliminating
the need for additional power outlets
and simplifying the network installation.
Also it is unaffected by local variance
in AC power, offering a standardized
power infrastructure.
power infrastructure.
Effective Traffic Monitoring
In order to fully understand the
performance of the network and ensure
the ongoing smooth delivery of critical
data, users must be able to measure
and analyze the traffic in real time.
performance of the network and ensure
the ongoing smooth delivery of critical
data, users must be able to measure
and analyze the traffic in real time.
The 8100L Series facilitates effective
traffic monitoring with sFlow, an
industry-standard technology for
monitoring high-speed switched
networks gives complete visibility
into the use of the network enabling
performance optimization, accounting,
billing for usage, and even defense
against security threats.
industry-standard technology for
monitoring high-speed switched
networks gives complete visibility
into the use of the network enabling
performance optimization, accounting,
billing for usage, and even defense
against security threats.
Gigabit and Fast Ethernet SFP
Support
The 8100L Series supports both
Gigabit and Fast Ethernet Small Form-
Factor Pluggable (SFP) uplinks. The
dual speed ports make this series ideal
for environments where Gigabit fiber
switches will be phased in over time.
dual speed ports make this series ideal
for environments where Gigabit fiber
switches will be phased in over time.
The 8100L Series allows for connectivity
to the legacy 100FX hardware until the
uplink device is upgraded to Gigabit.
uplink device is upgraded to Gigabit.
NOT AVAILABLE IN THE UNITED STATES AND CANADA
alliedtelesis
.com