Philips wet and dry electric razor AT830/41 AT830/41 Manual Do Utilizador
Códigos do produto
AT830/41
ENGLISH
10
Replace the frame and turn the lock
clockwise until it locks into place.
C
11
Insert the notch of the shaving unit into
the slot in the top of the razor (1) and
then close the shaving unit (2).
NOTE: If the shaving unit does not close smoothly,
make sure you inserted the shaving heads
properly and that the retaining frame is locked.
After Each Use: Trimmer
1
Turn razor OFF.
C
2
Push down spring-release trimmer switch.
C
3
Clean trimmer with the short-bristled side
of the brush every time you use it. Brush
up and down along the trimmer teeth.
C
4
Lubricate the trimmer teeth with one
drop of mineral oil every 6 months.
5
Close trimmer by pressing trimmer down.
22
ENGLISH
Replacing the Razor Heads
w
Replace the razor heads once a year for
optimal shaving results.
w
Replace damaged or worn razor heads with
model HQ8 Philips Norelco razor heads only.
1
Turn razor OFF, remove the charging plug
from the outlet and power cord from the
razor.
C
2
Press the Razor Head Release Button to
open the Razor Head Assembly.
C
3
Pull the shaving unit off the razor.
C
4
Turn the lock counterclockwise to unlock
(1) and remove the retaining frame (2).
5
Remove the razor heads and place the
new razor heads in the shaving unit.
C
Make sure that the two pointy edges of the head
fit exactly into the recesses.
23
1
2
2
1