Epson 9600 Manual Do Utilizador

Before you begin a large print job, you should check your ink levels. If one of 
your cartridges is low, you can replace it before you start. Or you can wait 
until the ink runs out, replace the cartridge, and then continue the job 
without any loss of print quality.

The easiest way to check ink levels is from the control panel:

When one of the 

Ink Out

 lights is flashing (and

 INK LOW

 is displayed on 

the control panel), the corresponding cartridge is almost out of ink. Make 
sure you have a replacement cartridge. When the light stays on and 

INK 

OUT 

is displayed, the cartridge is empty. You must replace the cartridge 

before you can continue printing. 

You can store partially 
used ink cartridges for 
up to 6 months. 

black*

black*

cyan

magenta

light cyan

light magenta

yellow

(almost

 

(full)

* If your printer uses UltraChrome ink, the black ink cartridges may be a 

combination of Photo Black, Matte Black, or Light Black. See page 146 for 
information on switching between black print modes. 

empty)