Allied Telesis Residential gateway, 3x 10/100TX LAN, 2x FXS, 1x 100FX SF BiDi WAN port AT-RG613BD Manual Do Utilizador
Códigos do produto
AT-RG613BD
AT-RG613 SERIES
Residential Gateways
MANAGEMENT & CONFIGURATION
The AT-RG600 is designed for high-volume deploy-
ment—as reflected by the Zero-Touch
Configurator (ZTC) that requires no user inter-
vention to install the unit. A distributed configura-
tion system based on the industry standard
Lightweight Directory Access Protocol (LDAP),
ZTC provides intelligent and automatic configura-
tion of remote RG units.
ment—as reflected by the Zero-Touch
Configurator (ZTC) that requires no user inter-
vention to install the unit. A distributed configura-
tion system based on the industry standard
Lightweight Directory Access Protocol (LDAP),
ZTC provides intelligent and automatic configura-
tion of remote RG units.
The ZTC client in the RG initiates the download
process on power-up or upon expiry of its DHCP
lease timer. After analyzing incoming status infor-
mation from each RG unit, ZTC dynamically cre-
ates the appropriate configuration file or operating
system download as required; it then selects the
appropriate download mechanism and completes
the process. ZTC provides secure authentication
of client devices, resilience through distributed
server operation, and built-in scalability for very
large networks.
process on power-up or upon expiry of its DHCP
lease timer. After analyzing incoming status infor-
mation from each RG unit, ZTC dynamically cre-
ates the appropriate configuration file or operating
system download as required; it then selects the
appropriate download mechanism and completes
the process. ZTC provides secure authentication
of client devices, resilience through distributed
server operation, and built-in scalability for very
large networks.
The AT-RG600 series also offers the following con-
ventional management & configuration interfaces:
• Local console port (using Command Line
ventional management & configuration interfaces:
• Local console port (using Command Line
Interfaces)
• Telnet (using Command Line Interfaces)
• SNMP v1/v2
• SNMP v1/v2
SPECIFICATIONS
USER PORTS
3 10/100TX (RJ45)
2 VoIP FXS ports (RJ-11)
2 VoIP FXS ports (RJ-11)
WAN
10/100TX (RJ45)
RG613TX
100FX multi-mode (SC)
RG613SH
100FX single-mode (SC)
RG613LH
100FX single-mode BiDi
RG613BD
VoIP PROTOCOLS
H.323 3.0
SIP 2.0
MGCP (NCS 1.0)
SIP 2.0
MGCP (NCS 1.0)
VoIP PORTS
G.711 a-law and -law
64kbps
G.729
8kbps
G.726
16/24/32/40kbps
G.723.1 (optional)
5.3kbps and 6.3kbps
G.168 LEC
8-32 msec
T.38
Fax Relay
Automatic fax/modem detection
Voice Activity Detection (VAD)
Comfort Noise Generation (CNG)
Caller ID
Error mitigation/bad frame interpolation
Adaptive jitter buffer
5 REN
RTP voice packet encapsulation
Voice Activity Detection (VAD)
Comfort Noise Generation (CNG)
Caller ID
Error mitigation/bad frame interpolation
Adaptive jitter buffer
5 REN
RTP voice packet encapsulation
LAYER 2 OPERATION
Layer 2 wirespeed packet switching
IGMP v1/v2 multicast support
Tag based IEEE 802.1Q VLANs (16 max.)
IEEE 802.1p prioritization
IEEE 802.1Q tag insertion and stripping
Programmable rate-limiting ingress/egress (32,000 steps)
Port-mirroring ingress/egress traffic
Double QoS queue on each port
Port speed selection 10, 100 or 10/100
1,000 MAC addresses
IGMP v1/v2 multicast support
Tag based IEEE 802.1Q VLANs (16 max.)
IEEE 802.1p prioritization
IEEE 802.1Q tag insertion and stripping
Programmable rate-limiting ingress/egress (32,000 steps)
Port-mirroring ingress/egress traffic
Double QoS queue on each port
Port speed selection 10, 100 or 10/100
1,000 MAC addresses
LAYER 3 OPERATION
NAT
PPPoE
Stateful Inspection Firewall
Intrusion detection & blocking system
IPSec/VPN pass-through
Virtual server
Global IP address pool
Dynamic port opening
DHCP client, server, and relay
DNS proxy
PAP/CHAP authentication
Static and dynamic IP address assignment
RIPv2
PPPoE
Stateful Inspection Firewall
Intrusion detection & blocking system
IPSec/VPN pass-through
Virtual server
Global IP address pool
Dynamic port opening
DHCP client, server, and relay
DNS proxy
PAP/CHAP authentication
Static and dynamic IP address assignment
RIPv2
MANAGEMENT
Zero Touch Configurator (ZTC), local console port, Telnet, SNMP,
Telesyn NMS
Telesyn NMS
REMOTE SOFTWARE UPGRADE
DHCP, upgrade via TFTP
Zero Touch Configurator (ZTC)
Zero Touch Configurator (ZTC)
STATUS LEDS
Power
System
POTs
System
POTs
use / ready / ringing
WAN
link / activity
LAN link /
activity
POWER CHARACTERISTICS
External power supply
Input
Input
12vDC, 1.5A
Power Consumption
10W
ENVIRONMENTAL SPECIFICATIONS
Operating Temp.
0°C (32°F) to 40°C (104°F)
Non-Operating Temp.
-10 ºC (14°F) to 70 ºC (158°F)
Operating Humidity
5% to 85% RH
PHYSICAL CHARACTERISTICS
AT-RG613SH/LH/BD
H x W x D
H x W x D
14.4cm (5.7") x 23.5cm (9.3") x
5cm (2")
5cm (2")
Weight
0.45kg (1.0 lb.)
AT-RG613TX
H x W x D
H x W x D
4.6cm (1.8") x 19.8cm (7.8") x
14.9cm (5.9")
14.9cm (5.9")
Weight
0.45kg (1.0 lb.)
STANDARDS & COMPLIANCE
IPv4
RFC791
TCP, UDP
RFC1144
IGMP (v1/v2)
RFC1112, 2236
PPPoE
RFC2516
PAP
RFC1334
CHAP
RFC1994
NAT
RFC1631
DHCP
RFC2131
H.323 4.0
SIP 2.0
SIP 2.0
RFC3261
MGCP/NCS 1.0
IEEE 802.1p/Q, IEEE 802.1d
IEEE 802.2, IEEE 802.3x
SNMP v1
G.711, G.726, G.729, G.723.1 (optional)
RTP/RTCP
TFTP
IEEE 802.1p/Q, IEEE 802.1d
IEEE 802.2, IEEE 802.3x
SNMP v1
G.711, G.726, G.729, G.723.1 (optional)
RTP/RTCP
TFTP
RFC1350
Telnet
RFC318
ARP
RFC826
ELECTRICAL/MECHANICAL
APPROVALS
APPROVALS
CE Marking
Safety
Safety
EN 60950
CSA 950/US
UL 1950
CSA 950/US
UL 1950
Emission
FCC Part 15 Class B Part 68
EN55022 Class B
EN55022 Class B
Immunity
EN55024
WARRANTY
2-year warranty
RESIDENTIAL GATEWAYS