Avaya 1000BASE-LX, SFP AA1419049-E6 Manual Do Utilizador
Códigos do produto
AA1419049-E6
Chapter 4: Small form factor pluggable
transceivers
This section describes how to select and install small form factor pluggable (SFP) transceivers.
Use an SFP to connect a device motherboard to a fiber optic or unshielded twisted pair network cable.
The SFPs described in this section provide Ethernet at 1 gigabit per second (Gb/s).
The SFPs described in this section provide Ethernet at 1 gigabit per second (Gb/s).
Note:
SFPs are supported on the chassis ports as well as the 10–port GigE Medium Module. However,
SFPs installed on the Secure Router 4134 chassis ports are not capable of 1Gb/s throughput. If 1Gb/
s throughput is required, install the SFP on the Medium Module SFP slot
SFPs installed on the Secure Router 4134 chassis ports are not capable of 1Gb/s throughput. If 1Gb/
s throughput is required, install the SFP on the Medium Module SFP slot
The Secure Router 2330 chassis SFP ports are capable of 1Gb/s throughput.
Navigation
•
on page 21
•
•
•
on page 27
Avaya SFPs qualified with Secure Router 2330/4134
You can use a Digital Diagnostic Indicating (DDI) SFP in an Avaya Secure Router 2330/4134
module that supports SFPs. The router supports the optical functions of the SFP. A future
release will provide access to the DDI information.
module that supports SFPs. The router supports the optical functions of the SFP. A future
release will provide access to the DDI information.
The following table lists and describes the Avaya SFP models with DDI capability. All of these
SFPs use LC connectors.
SFPs use LC connectors.
Installation — SFPs
December 2011 21