Alcatel-Lucent OmniAccess IAP93 OAW-IAP105 Ficha De Dados
Códigos do produto
OAW-IAP105
Alcatel-Lucent OmniAccess Instant Access Points 92/93/105 | Datasheet
2
Investment Protection
As WLAN requirements expand, OmniAccess Instant can be re-imaged as an 802.11n campus AP and migrate
to a centralized WLAN Switch/Controller architecture that supports up to 2,048 APs. In addition to
providing WLAN access, APs in a centralized, controller architecture can provide wireless intrusion
protection and powerful spectrum analysis capabilities.
FEATURES
BENEFITS
Virtual WLAN Switch/Controller
Virtual WLAN Switch/Controller enables any IAP to be the controller
removing the need to have a dedicated controller.
removing the need to have a dedicated controller.
Auto-Selection of virtual WLAN
Switch/Controller
Switch/Controller
Auto selection of WLAN Switch/Controller with redundancy enables ease of
use with always on redundancy.
use with always on redundancy.
One-touch over the air
provisioning, Auto-Discovery and
Auto-configuration
provisioning, Auto-Discovery and
Auto-configuration
One-touch over the air provisioning of first IAP, Auto-Discovery and
Auto-configuration of new IAPs, eases deployment and expansion of
existing network. Enables whole IAP network to be up in 5 minutes
once the first IAP is configured.
Auto-configuration of new IAPs, eases deployment and expansion of
existing network. Enables whole IAP network to be up in 5 minutes
once the first IAP is configured.
Centralized Management of
multiple instant networks
multiple instant networks
OV3600 Air Manager can centrally and securely manage Multiple
OmniAccess Instant networks, to operate hundreds of remote locations
with real-time visibility into users, mobile device and WLANs.
OmniAccess Instant networks, to operate hundreds of remote locations
with real-time visibility into users, mobile device and WLANs.
Re-Image Instant AP to campus
AP
AP
Re-Imaging of Instant AP to campus APs provides investment protection
as same APs can used to meet new network expansion and
requirements.
as same APs can used to meet new network expansion and
requirements.
IAP Features
Application
•
Cost-effective indoor 802.11n single or dual-radio, dual-
band APs for medium to high- density deployments
band APs for medium to high- density deployments
Operating Mode
•
802.11a/b/g/n AP
Radios
•
Software-configurable single/dual radio capable of
supporting 2.4 GHz and 5 GHz
supporting 2.4 GHz and 5 GHz
•
Dual radio 802.11n capable (IAP105 only), implementing
2x2 MIMO with two spatial streams, providing up to 300
Mbps data rate per radio
2x2 MIMO with two spatial streams, providing up to 300
Mbps data rate per radio
RF Management
•
Automatic transmit power and channel management
control with auto coverage hole correction via Adaptive
Radio Management (ARM)
control with auto coverage hole correction via Adaptive
Radio Management (ARM)
•
Supported radio technologies:
•
802.11b: Direct-sequence spread-spectrum
(DSSS)
(DSSS)
•
802.11a/g/n: Orthogonal frequency division
multiplexing (OFDM)
multiplexing (OFDM)
•
802.11n: 2x2 MIMO with 2 spatial streams
•
Supported modulation types
•
802.11b: BPSK, QPSK, CCK
•
802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
•
Transmit power: Configurable in increments of 0.5
dBm
dBm
•
Maximum transmit power:
•
2.4GHz: 23 dBm (limited by local regulatory
requirements)
requirements)
•
5 GHz: 23 dBm (limited by local regulatory
requirements)
requirements)
•
Maximum ratio combining (MRC) for improved
receiver performance
receiver performance
•
Association rates (Mbps):
•
802.11b: 1, 2, 5.5, 11
•
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
•
802.11n: MCS0 - MCS15 (6.5 Mbps - 300
Mbps)
Mbps)
•
802.11n high-throughput (HT) Support: HT 20/40
•
802.11n packet aggregation: A-MPDU, A-MSDU