Adaptec SCSI Card 2930 Ultra AHA2930U-ROHS-KIT Manual Do Utilizador

Windows Me has embedded driver support for a SCSI card as part of 
the installation software. When the SCSI Card 2930CU is installed 
and you have restarted your computer, the Add New Hardware 
Wizard window appears to guide you through the final steps.

When the Add New Hardware Wizard window appears, select 
the top radio button to launch an automatic search for the most 
suitable driver, and click Next.

Windows locates the appropriate driver for the newly-detected 
SCSI card and automatically processes the installation.

The SCSI Card 2930CU is detected as 

PCI SCSI AHA-2930CU

.

If Windows is unable to find the driver, insert the 

SCSI Card 2930 CD into the CD-ROM drive and direct 
Windows to search the CD for the driver.

Click Finish to complete the installation. To verify driver 
installation, see 

.

This section explains how to install the driver for Windows 95/98. 
The driver is detected as

 PCI SCSI AHA-2930CU

. The driver file on 

the SCSI Card 2930 CD is 

aic78xx.mpd

.

If you are performing a first-time Windows 95/98 installation, see 
the next section, 

.

If Windows 95/98 is already installed on your system, see 

 or 

When Windows 95/98 starts, if a New Hardware Found 

dialog box displays after your SCSI Card 2930CU has been 
installed, select Driver from Disk Provided by Hardware 
Manufacturer

. Insert the SCSI Card 2930 CD into the 

CD-ROM drive and type the drive letter for your CD-ROM 
drive. Then, follow the on-screen instructions.