Adaptec SCSI Card 2930 Ultra AHA2930U-ROHS-KIT Manual Do Utilizador
Códigos do produto
AHA2930U-ROHS-KIT
4-12
Installing Drivers
Installing the Driver When Installing Windows NT
The driver is embedded on the Windows NT 4.0 CD. During a
normal Windows NT installation, the SCSI Card 2930CU is detected
in your system and the embedded driver is automatically installed.
normal Windows NT installation, the SCSI Card 2930CU is detected
in your system and the embedded driver is automatically installed.
Installing the Driver When Windows NT is Already Installed
To update or install the drivers if Windows NT is already installed
1
Start Windows NT.
2
Click Start, point to Settings, then click Control Panel.
3
Double-click SCSI Adapters, then click the Drivers tab.
4
Click Add.
5
In the Install Driver window, click Have Disk.
6
Insert the SCSI Card 2930 CD into the CD-ROM drive.
7
In the Copy Manufacturer’s File From text box, type the drive
letter for your CD-ROM drive, and click OK.
letter for your CD-ROM drive, and click OK.
8
In the Install Driver window, Click OK.
The system asks if you want to use the currently installed driver
or install a new one.
or install a new one.
9
Click New.
10
Type the drive letter for your CD-ROM drive, then click Continue.
The driver is now installed.
11
Restart your computer for the changes to take effect.
Installing the Driver When Installing Windows NT to a SCSI
Hard Disk Drive Attached to the SCSI Card 2930CU
Hard Disk Drive Attached to the SCSI Card 2930CU
Follow the appropriate set of instructions for a fresh Windows NT
installation from either CD or floppy disk.
installation from either CD or floppy disk.
Completing an Installation from CD
1
Insert your Windows NT 4.0 CD into your CD-ROM drive, then
turn on your computer.
turn on your computer.
2
Press and release F6 immediately when this message appears:
Setup is inspecting your computer’s hardware configuration...