Finisar FTRJ1621S1MCL Manual Do Utilizador
FTRJ1621S1xCL 2x10 Pin SFF Product Specification – December 2003
F i n i s a r
Finisar Corporation December 16, 2003 RevE
Page 5
V. General Specifications
Parameter Symbol
Min
Typ
Max
Units
Ref.
Data Rate
BR
155
2667
Mb/s
1
Bit Error Rate
BER
10
-12
2
Max. Supported Link Length on
9/125
9/125
µm SMF @ OC-48
L
MAX1
80 km
3
Max. Supported Link Length on
9/125
9/125
µm SMF @ 2X Fibre Channel
L
MAX2
85 km
3
Max. Supported Link Length on
9/125
9/125
µm SMF @ Gigabit Ethernet
L
MAX3
100 km
3
Max. Supported Link Length on
9/125
9/125
µm SMF @ OC-12
L
MAX4
100 km
3
Max. Supported Link Length on
9/125
9/125
µm SMF @ OC-3
L
MAX5
100 km
3
Notes:
1. SONET OC-48 LR-2/SDH STM L-16.2 compliant. Compatible with Gigabit Ethernet, 1X/2X Fibre
1. SONET OC-48 LR-2/SDH STM L-16.2 compliant. Compatible with Gigabit Ethernet, 1X/2X Fibre
Channel, SONET OC-12 and OC-3. Supports FEC at 2.67Gb/s.
2. Tested with a PRBS 2
31
-1 test pattern interspersed with 72 consecutive ones and 72 consecutive zeros
unless otherwise specified.
3. Attenuation of 0.275 dB/km is used for the link length calculations (per GR-253 CORE). A 2dB
penalty is included for dispersion on >2Gb/s data rates. Distances are indicative only. Please refer to
the Optical Specifications in Table IV to calculate a more accurate link budget based on specific
conditions in your application.
the Optical Specifications in Table IV to calculate a more accurate link budget based on specific
conditions in your application.
VI.
Environmental Specifications
Finisar SFP transceivers have an extended operating temperature range from -10°C to
+70°C case temperature.
+70°C case temperature.
Parameter Symbol
Min
Typ
Max
Units
Ref.
Case Operating Temperature
T
op
-10 70 °C
Storage Temperature
T
sto
-40 85 °C
VII. Regulatory Compliance
Finisar transceivers are Class 1 Laser Products and comply with US FDA regulations.
These products are certified by TÜV and CSA to meet the Class 1 eye safety
requirements of EN (IEC) 60825 and the electrical safety requirements of
EN (IEC) 60950. Copies of certificates are available at Finisar Corporation upon request.
These products are certified by TÜV and CSA to meet the Class 1 eye safety
requirements of EN (IEC) 60825 and the electrical safety requirements of
EN (IEC) 60950. Copies of certificates are available at Finisar Corporation upon request.