Avaya 1000BASE-XD DDI, 1310nm, SFP AA1419050-E6 Manual Do Utilizador
Códigos do produto
AA1419050-E6
4. Remove the dust cover from the optical bore and insert the fiber optic connector.
Job aid
Depending on the transceiver manufacturer, your SFP transceiver can have various types of
locking and extractor mechanisms.
locking and extractor mechanisms.
The following figure shows a typical mechanism used on SFP transceivers; other locking and
extractor mechanisms exist, although they are not shown here. In the following figure, the SFP
still has the bore plug installed. Pull the bail to release the device.
extractor mechanisms exist, although they are not shown here. In the following figure, the SFP
still has the bore plug installed. Pull the bail to release the device.
The following figure shows the wrap-around latch-type extraction mechanism. To remove the
device, push the collar towards the module.
device, push the collar towards the module.
Small form factor pluggable transceivers
26 Installation — SFPs
December 2011