Avaya 1000BASE-XD DDI, 1310nm, SFP AA1419050-E6 Manual Do Utilizador

Receiver characteristics

Receiver sensitivity

– 17 dBm

Maximum input power

0 dBm

The 1000BASE-T SFP provides gigabit Ethernet connectivity using a single eight-pin RJ-45
connector. The 1000BASE-T is a tri-speed copper SFP that can operate at 1 gigabit per second
(1 Gb/s), 100 megabits per second (100 Mb/s), or 10 Mb/s.

This SFP supports autosensing of port speed and autonegotiation of duplex mode. However,
you can also set a fixed speed at 10 or 100 Mb/s and duplex mode to half or full.

The part number for this model is AA1419043-E6 (internal part number 323242-B).

Avaya recommends setting all 1000BaseT ports to auto-negotiate in accordance with the
IEEE 802.3ab standard. By default, SFPs inserted into certain product-specific modules are
set for autonegotiation = True.

The maximum current requirement of the SFP is 375 milliamperes (mA) at 5 volts (V).

The following table describes the 1000BASE-T SFP specifications.

Standards

IEEE 802.3z, IEEE 802.3ab

Connectors

RJ-45

Cabling

CAT5E or better UTP

Distance

Up to 100 m

The following table describes the 1000BASE-XD DDI SFP. This SFP operates at 1310 nm and
has a reach of up to 40 km. The part number is AA1419050-E6 (internal part number 318636-
B).

SFP specifications

38     Installation — SFPs

December 2011