NEC 1TB 2.5" 7200 rpm SATA II N8150-334 Manual Do Utilizador
Códigos do produto
N8150-334
CONFIGURATION GUIDE
–
NEC EXPRESS5800/R110d-1E
NEC Corporation
Revision 2.2, January 2011
11
Maximum Available Memory
See the table below for the maximum memory size that you can actually use on your system.
The maximum available memory is less than the maximum physical memory supported by your system
because some chipsets require PCI resource space of about 750MB. PCI resource requirements vary
depending on the type and the number of PCI cards you are using.
because some chipsets require PCI resource space of about 750MB. PCI resource requirements vary
depending on the type and the number of PCI cards you are using.
Maximum Memory Size Supported by OS
Maximum Available Memory
4 GB
Microsoft Windows Server 2003 R2, Standard Edition
Microsoft Windows Server 2008 Standard
Microsoft Windows Server 2008 Standard
4 GB (HW-DEP enabled)
App. 3.3 GB (HW-DEP disabled)
App. 3.3 GB (HW-DEP disabled)
32 GB
Microsoft Windows Server 2003 R2, Standard x64 Edition
Microsoft Windows Server 2008 Standard (x64)
Microsoft Windows Server 2008 R2 Standard (x64)
Microsoft Windows Server 2008 Standard (x64)
Microsoft Windows Server 2008 R2 Standard (x64)
32 GB
64 GB
Microsoft Windows Server 2003 R2, Enterprise Edition
Microsoft Windows Server 2008 Enterprise
Microsoft Windows Server 2008 Enterprise
32 GB
1 TB
Microsoft Windows Server 2003 R2, Enterprise x64 Edition
32 GB
2 TB
Microsoft Windows Server 2008 Enterprise (x64)
Microsoft Windows Server 2008 R2 Enterprise (x64)
Microsoft Windows Server 2008 R2 Enterprise (x64)
32 GB
16 GB
Red Hat Enterprise Linux 5
Red Hat Enterprise Linux 6
Red Hat Enterprise Linux 6
16 GB
256 GB
Red Hat Enterprise Linux 5 (EM64T)
32 GB
2 TB
Red Hat Enterprise Linux 6.0 (x86_64)
32 GB
4 Internal Hard Disk Drives
4.1
RAID Configuration
Refer to the section in accordance with your disk form factor and RAID configuration.
4.1.1
3.5-inch Drive
NOTE:
On-board SATA RAID controller is supported only on Windows operating systems. An optional RAID
controller is required to configure RAID array for other operating systems.
controller is required to configure RAID array for other operating systems.
On-board SATA RAID Controller does not support RAID 10 configured with 2TB and 3TB HDDs.
Hot plug insertion/removal is not supported with the on-board SATA non-RAID controller.
All hard drives within a RAID array should be of the same capacity.
An optional RAID controller occupies one PCI slot.
Non-RAID
RAID 5/6
On-board SATA
RAID Controller
RAID Controller
Optional RAID
Controller
Controller
128MB Cache
256MB Cache
512MB Cache
256MB Cache
Refer to
RAID 0/1/10
SATA
SATA
SATA
SATA
SATA
Available Disk