Eaton 9130-1500RM 2U 103006449-6591 Manual Do Utilizador
Códigos do produto
103006449-6591
Eaton 9130 UPS
Powerware series
Product snapshot
Product rating: 700 to 6000 VA
Voltage:
220-240 V
Frequency: 50/60
Hz
(auto-sensing)
Configuration: Rackmount or tower
The Eaton
®
9130 UPS, Power-
ware
®
series, resolves utility
power problems and delivers
superior power protection for
IT and networking equipment,
medical systems, manufactur-
ing process control—or any-
where critical equipment and
applications require clean,
superior power protection for
IT and networking equipment,
medical systems, manufactur-
ing process control—or any-
where critical equipment and
applications require clean,
continuous power.
Double-conversion
design for superior
power protection
design for superior
power protection
The 9130 is constantly moni-
toring power conditions—
regulating both voltage and
frequency. Even when pre-
sented with the most severe
power problems, this UPS’s
output remains within three
percent of nominal voltage.
toring power conditions—
regulating both voltage and
frequency. Even when pre-
sented with the most severe
power problems, this UPS’s
output remains within three
percent of nominal voltage.
With a wide input voltage ran-
ge, the 9130 does not depend
on batteries to smooth out
minor power fluctuations. Bat-
teries are conserved for those
times when utility power is
highly unstable or completely
out. If an outage occurs, the
9130 transfers to battery with
ge, the 9130 does not depend
on batteries to smooth out
minor power fluctuations. Bat-
teries are conserved for those
times when utility power is
highly unstable or completely
out. If an outage occurs, the
9130 transfers to battery with
zero interruption in power,
making this an ideal UPS for
sensitive and critical equip-
ment.
making this an ideal UPS for
sensitive and critical equip-
ment.
More real power for less
cost in less space
cost in less space
More real power. High 0.9
output power factor enables
the 9130 to provide its full
power capability to modern
IT equipment that may have
a wide range of leading and
lagging power factors. With a
0.99 input power factor, this
UPS avoids the disturbances
that some energy converters
tend to cause.
output power factor enables
the 9130 to provide its full
power capability to modern
IT equipment that may have
a wide range of leading and
lagging power factors. With a
0.99 input power factor, this
UPS avoids the disturbances
that some energy converters
tend to cause.
High efficiency.
T
he more
efficient the UPS, the lower
your utility and cooling bills.
When power conditions are
within acceptable limits, the
9130 can operate in a high-
efficiency mode providing 95
percent or higher efficiency.
your utility and cooling bills.
When power conditions are
within acceptable limits, the
9130 can operate in a high-
efficiency mode providing 95
percent or higher efficiency.
Advanced power protection for:
• IT and networking environments
• Servers, networking gear
• Telecommunications, VoIP, security systems
• Medical
systems
• Diagnostics and medical screening
• Patient record archives
• Manufacturing
systems
• Chip
fabrication
• Pharmaceutical
production
• Chemical
processing
Features
• Protects against downtime, data loss and process interrup-
tion by providing continuous, clean power
• Offers premium performance with a 0.9 power factor and
>95 percent efficiency
• Increases battery service life and system uptime with-
ABM™ battery charging technology
• Enables prolonged runtime of essential equipment during
power outages by allowing for orderly, remote shutdown
of non-critical systems or processes by Load Segment
Control
of non-critical systems or processes by Load Segment
Control
• Provides installation flexibility with a choice of rack or
tower designs, both conserving valuable space
• Enhanced monitoring and configuration capability through
easily navigated multilingual graphical display