ZyXEL ADSL Prestige 662HW-61 130122.0662HW61 Manual Do Utilizador

Prestige 662H/HW Series User’s Guide

443

Chapter 45 VPN/IPSec Setup

You only configure Menu 27.1.1.2 – Manual Setup when you select Manual in the Key 
Management field in Menu 27.1.1 – IPSec Setup. Manual key management is useful if you 
have problems with IKE key management.

This field is a combination of mode and security protocols used for the VPN. See the Web 
Configurator part on VPN for more information on these parameters. 

To edit this menu, move the cursor to the Edit Manual Setup field in Menu 27.1.1 – IPSec 
Setup press [SPACE BAR] to select Yes and then press [ENTER] to go to Menu 27.1.1.2 – 
Manual Setup.

Key Group

You must choose a key group for phase 1 IKE setup. DH1 (default) refers to Diffie-

Hellman Group 1 a 768 bit random number. DH2 refers to Diffie-Hellman Group 2 a 

1024 bit (1Kb) random number. 

Phase 2

Active Protocol

Press [SPACE BAR] to choose from ESP or AH and then press [ENTER]. See earlier 

for a discussion of these protocols.

Encryption 

Algorithm

Press [SPACE BAR] to choose from NULL, DES, 3DES or AES and then press 

[ENTER]. Select NULL to set up a tunnel without encryption.

Authentication

Algorithm

Press [SPACE BAR] to choose from SHA1 or MD5 and then press [ENTER].

SA Life Time 

(Seconds)

Define the length of time before an IPSec Security Association automatically 

renegotiates in this field. It may range from 60 to 3,000,000 seconds (almost 35 days).

Encapsulation

Press [SPACE BAR] to choose from Tunnel mode or Transport mode and then press 

[ENTER]. See earlier for a discussion of these.

Perfect Forward 

Secrecy (PFS)

Perfect Forward Secrecy (PFS) is disabled (None) by default in phase 2 IPSec SA 

setup. This allows faster IPSec setup, but is not so secure. Press [SPACE BAR] and 

choose from DH1 or DH2 to enable PFS. DH1 refers to Diffie-Hellman Group 1 a 768 

bit random number. DH2 refers to Diffie-Hellman Group 2 a 1024 bit (1Kb) random 

number (more secure, yet slower). 

When you have completed this menu, press [ENTER] at the prompt “

Press ENTER to Confirm 

or ESC to Cancel:

”  to save your configuration, or press [ESC] at any time to cancel.

Table 151   Menu 27.1.1.1 IKE Setup (continued)

Table 152   Active Protocol: Encapsulation and Security Protocol

Tunnel

ESP

Transport

AH