ZyXEL ADSL Prestige 662HW-61 130122.0662HW61 Manual Do Utilizador
Códigos do produto
130122.0662HW61
Prestige 662H/HW Series User’s Guide
45
Chapter 1 Getting To Know Your Prestige
Models ending in “1”, for example Prestige 662HW-61, denote a device that works over the
analog telephone system, POTS (Plain Old Telephone Service). Models ending in “3” denote a
device that works over ISDN (Integrated Synchronous Digital System). Models ending in “7”
denote a device that works over T-ISDN (UR-2).
analog telephone system, POTS (Plain Old Telephone Service). Models ending in “3” denote a
device that works over ISDN (Integrated Synchronous Digital System). Models ending in “7”
denote a device that works over T-ISDN (UR-2).
The web browser-based Graphical User Interface (GUI) provides easy management.
1.1.1 Features of the Prestige
The following sections describe the features of the Prestige.
High Speed Internet Access
Your Prestige ADSL/ADSL2/ADSL2+ router can support downstream transmission rates of
up to 24Mbps and upstream transmission rates of 3.5Mbps. Actual speeds attained depend on
ISP DSLAM environment.
up to 24Mbps and upstream transmission rates of 3.5Mbps. Actual speeds attained depend on
ISP DSLAM environment.
Zero Configuration Internet Access
Once you connect and turn on the Prestige, it automatically detects the Internet connection
settings (such as the VCI/VPI numbers and the encapsulation method) from the ISP and makes
the necessary configuration changes. In cases where additional account information (such as
an Internet account user name and password) is required or the Prestige cannot connect to the
ISP, you will be redirected to web screen(s) for information input or troubleshooting.
settings (such as the VCI/VPI numbers and the encapsulation method) from the ISP and makes
the necessary configuration changes. In cases where additional account information (such as
an Internet account user name and password) is required or the Prestige cannot connect to the
ISP, you will be redirected to web screen(s) for information input or troubleshooting.
Any IP
The Any IP feature allows a computer to access the Internet and the Prestige without changing
the network settings (such as IP address and subnet mask) of the computer, when the IP
addresses of the computer and the Prestige are not in the same subnet.
the network settings (such as IP address and subnet mask) of the computer, when the IP
addresses of the computer and the Prestige are not in the same subnet.
Firewall
The Prestige is a stateful inspection firewall with DoS (Denial of Service) protection. By
default, when the firewall is activated, all incoming traffic from the WAN to the LAN is
blocked unless it is initiated from the LAN. The Prestige firewall supports TCP/UDP
inspection, DoS detection and prevention, real time alerts, reports and logs.
default, when the firewall is activated, all incoming traffic from the WAN to the LAN is
blocked unless it is initiated from the LAN. The Prestige firewall supports TCP/UDP
inspection, DoS detection and prevention, real time alerts, reports and logs.
Note: Only use firmware for your Prestige’s specific model. Refer to the
label on the bottom of your Prestige.
label on the bottom of your Prestige.
Note: You can configure most features of the Prestige via SMT but we
recommend you configure the firewall and content filters using the web
configurator.
recommend you configure the firewall and content filters using the web
configurator.