Cisco Aironet 1310G Outdoor Access Point AIR-LAP1310G-E-K9R Manual Do Utilizador
Códigos do produto
AIR-LAP1310G-E-K9R
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 3 of 4
Product Number
Product Description
AIR-LAP1310G-A-K9R (FCC regulatory domain)
AIR-LAP1310G-E-K9R (EMEA regulatory domain)
AIR-LAP1310G-J-K9R (TELEC regulatory domain)
Cisco Aironet 1300 Series Outdoor Access Point with RP-TNC type connector
●
Cisco Lightweight Access Point Protocol
●
Ships with:
◦
Power cord (configurable)
◦
100 to 240 VAC power supply (AIR-PWR-A=) providing 48 VDC to the power injector
◦
48 VDC power injector (AIR-PWRINJ-BLR2=)
◦
1-ft dual RG-6 cable assembly (Ethernet uplink from power injector)
●
Roof Mount Kit (AIR-ACCRMK1300=) and Wall Mount Kit (AIR-ACCWAMK1300=)
available separately
●
Optional 5-ft, 2.4-GHz RF jumper cable available separately
●
Antennas available separately
AIR_BR1310G-A-K9-T
(FCC regulatory domain for Transportation)
(FCC regulatory domain for Transportation)
●
Ships with:
◦
12 to 40 VDC power injector (AIR-PWRINJ-BLR2T=) for use with DC power supply
installations
installations
◦
1-ft dual RG-6 cable assembly (Ethernet uplink from power injector)
◦
Threaded power connector
SOFTWARE OPTIONS
Cisco Aironet 1300 Series devices can be ordered as an autonomous access point or bridge (AIR-BR1310G-x-K9 or AIR-BR1310G-x-
K9-R). Alternatively, you can order an LWAPP-based version that works along with Cisco wireless LAN controllers (AIR-LAP1310G-x-
K9 orAIR-LAP1310AG-x-K9R). When you order an autonomous Cisco Aironet 1300 Series device, you must select the software image
as part of the configuration. When you order an LWAPP-based Cisco Aironet 1300 Series device, no software need be specified because
this is managed by the controller.
MOUNTING KITS FOR CISCO AIRONET 1300 SERIES OUTDOOR ACCESS POINT/BRIDGES
A Roof Mount Kit is available for use with the Cisco Aironet 1300 Series Outdoor Access Point or Bridge (integrated antenna and
connectorized versions). A Wall Mount Kit is available for use with the Cisco Aironet 1300 Series Outdoor Access Point or Bridge
with the RP-TNC type connector. The Wall Mount Kit is for indoor use only. These kits must be ordered separately (Table 3).
Table 3.
Mounting Kits for Cisco Aironet 1300 Series Outdoor Access Point or Bridge
Product Number
Product Description
AIR-ACCWAMK1300=
●
Cisco Aironet 1300 Series Wall Mount Kit for use with AIR-BR1310G-x-K9-R or AIR-LAP1310G-x-K9R
●
Kit includes:
◦
Wall-mount bracket
◦
Mounting hardware
◦
1-ft, dual RG-59 cable assembly (Ethernet uplink from power injector)
AIR-ACCRMK1300=
●
Cisco Aironet 1300 Series Roof Mount Kit for use with AIR-BR1310G-x-K9, AIR-BR1310G-x-K9-R, AIR-LAP1310G-x-K9,
or AIR-LAP1310G-x-K9R
●
Kit includes:
◦
Roof-mount mast (pole and mounting base)
◦
Multifunction mount (allows mounting to roof-mount mast, or directly to a wall)
◦
Mounting hardware
◦
20-ft dual RG-6 cable assembly with F-Type connectors
◦
50-ft dual RG-6 cable assembly with F-Type connectors
◦
Coaxial sealant
◦
One Cisco Aironet grounding block
◦
Grounding lug
◦
Anticorrosion gel U-bolts
●
Optional 100-ft dual RG-6 cable available separately