Altronix AL602ULADA Folheto

Página de 2
•  24VDC rated @ 6.5 amp max.
•  Two (2) Class A or four (4) Class B outputs.
•  Two (2) Class A or two (2) Class B FACP inputs.
•  Two (2) Class A or four (4) Class B 
  indicating circuits.
•  Two (2) Class B outputs may be paralleled for more  
  power on an indicating circuit.
•  One (1) Aux. Power Output @ 1 amp supply current 
  (w/battery back up). 
•  Signal Circuit Trouble Memory - facilitates quickly  
  locating intermittent system trouble and eliminates  
  costly and unnecessary service calls. LED’s indicate a  
  prior fault (short, open, ground) has occurred on one  
  or more signaling circuit outputs.
•  2-wire Horn/Strobe Sync mode allows audible 
  notification appliances (Horns) to be silenced while  
  visual notification appliances (Strobes) continue 
  to operate.
•  Horn/Strobe sync protocols include: 
  CooperWheelock®, Gentex®, 
  System Sensor®, Faraday, Amseco.
•  Temporal Code 3 Mode.
•  Steady Mode.
•  Input to Output Follower Mode (maintains 
  synchronization of notification appliance circuits).
•  March Time.
•  Compatible with 12VDC or 24VDC fire panels.   
•  Common trouble inputs and outputs.
•  Ground fault detection.
•  Input 115VAC.
•  AC fail supervision (form “C” contacts). 
•  Low battery supervision (form “C” contacts). 
•  Battery presence supervision (form “C” contacts).
•  Power supply, logic board, red enclosure, cam lock,  
  transformer & battery leads.
•  Enclosure:
  - Combination knockouts are 1/2” and 3/4”
  - Accommodates up to two (2) 
    12VDC/12AH batteries.
AL602ULADA weights:
Product weight: 9.6 lbs.
Shipping weight: 12.3 lbs.
AL602ULADA
NAC Power Extenders
 Rev. AL602ULADA_A25K
Overview
Specifications
Agency Approvals
UL Listed Control Units and Accessories 
for Fire Alarm Systems (UL 864) Ninth 
Edition
Factory Mutual Approved.
NYC Department of Buildings Approved.
California State Fire Marshal Approved.
The AL602ULADA are extremely cost effective voltage regulated remote NAC 
Power Extenders. They may be connected to any 24 volt Fire Alarm Control 
Panel (FACP). Primary applications include Notification Appliance Circuit (NAC) 
expansion (supports ADA requirements) and will provide auxiliary power to sup-
port system accessories. 
CooperWheelock is a registered trademark of CooperWheelock. Gentex is a registered trademark of Gentex Corporation. System Sensor is a registered trademark of Honeywell.