ZyXEL VoIP Router Prestige 2602R-61 91-006-024004 Manual Do Utilizador

Prestige 2602R Series User’s Guide

430 

Appendix K Log Descriptions

 

 

Triangle route packet forwarded: 
ICMP

The firewall allowed a triangle route session to pass 

through.

Packet without a NAT table entry 
blocked: ICMP

The router blocked a packet that didn’t have a 

corresponding NAT table entry.

Unsupported/out-of-order ICMP: 
ICMP

The firewall does not support this kind of ICMP packets or 

the ICMP packets are out of order.

Router reply ICMP packet: ICMP

The router sent an ICMP reply packet to the sender.

Table 155   CDR Logs 

board %d line %d channel %d, 
call %d, %s C01 Outgoing Call 
dev=%x ch=%x %s

The router received the setup requirements for a call. “call” is 

the reference (count) number of the call. “dev” is the device 

type (3 is for dial-up, 6 is for PPPoE, 10 is for PPTP). 

"channel" or “ch” is the call channel ID.For example,"board 0 

line 0 channel 0, call 3, C01 Outgoing Call dev=6 ch=0 

"Means the router has dialed to the PPPoE server 3 times.

board %d line %d channel %d, 
call %d, %s C02 OutCall 
Connected %d %s

The PPPoE, PPTP or dial-up call is connected.

board %d line %d channel %d, 
call %d, %s C02 Call 
Terminated

The PPPoE, PPTP or dial-up call was disconnected.

Table 156   PPP Logs 

ppp:LCP Starting

The PPP connection’s Link Control Protocol stage has started.

ppp:LCP Opening

The PPP connection’s Link Control Protocol stage is opening.

ppp:CHAP Opening

The PPP connection’s Challenge Handshake Authentication Protocol stage is 

opening.

ppp:IPCP Starting The PPP connection’s Internet Protocol Control Protocol stage is starting.

ppp:IPCP Opening

The PPP connection’s Internet Protocol Control Protocol stage is opening.

ppp:LCP Closing

The PPP connection’s Link Control Protocol stage is closing.

ppp:IPCP Closing

The PPP connection’s Internet Protocol Control Protocol stage is closing.

Table 154   ICMP Logs (continued)