ZyXEL VoIP Router Prestige 2602R-61 91-006-024004 Manual Do Utilizador

Prestige 2602R Series User’s Guide

58 

Chapter 3 Wizard Setup

The following table describes the fields in this screen.

Table 4   Wizard Setup: First Screen

Mode

From the Mode drop-down list box, select Routing (default) if your ISP allows 

multiple computers to share an Internet account. Otherwise select Bridge. 

Encapsulation

Select the encapsulation type your ISP uses from the Encapsulation drop-down list 

box. Choices vary depending on what you select in the Mode field.  
If you select Bridge in the Mode field, select either PPPoA or RFC 1483. 
If you select Routing in the Mode field, select PPPoA, RFC 1483, ENET ENCAP or 

PPPoE.

Multiplex

Select the multiplexing method used by your ISP from the Multiplex drop-down list 

box either VC-based or LLC-based. 

Virtual Circuit 

ID

VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier) define a virtual circuit. 

Refer to the appendix for more information.

VPI

Enter the VPI assigned to you. This field may already be configured.

VCI

Enter the VCI assigned to you. This field may already be configured.

Next

Click this button to go to the next wizard screen. The next wizard screen you see 

depends on what protocol you chose above. Click on the protocol link to see the next 

wizard screen for that protocol.

The second wizard screen varies depending on what mode and encapsulation type you use. All 
screens shown are with routing mode. Configure the fields and click Next to continue. 

Figure 11   Internet Connection with PPPoE