Altronix AL600ULXPD16 Folheto

AL600ULXPD16 is a multi-output power supply/charger which converts a 
115VAC, 60Hz input into sixteen (16) 12VDC or 24VDC   non-power
limited outputs.

Rev. DSAL600ULXPD16_04242012

AL600ULXPD16

•  Input 115VAC, 60Hz, 1.9 amp.

•  12VDC or 24VDC selectable output.
• 6 amp continuous supply current.
•  Sixteen (16) fuse protected outputs.
•  Output fuses are rated @ 3.5 amp/250VAC.
•  Filtered and electronically regulated output.
•  Short circuit and thermal overload protection.

•  Built-in charger for sealed lead acid or
  gel type batteries.
•  Automatic switch over to stand-by battery
 when AC fails.
•  Maximum charge current 0.7 amp.

•  AC fail supervision (form “C” contacts).
•  Low battery supervision (form “C” contacts).
•  Battery presence supervision (form “C” contacts).

•  AC input and DC output LED indicators.

•  Operating temperature: 0º C to 49º C ambient.
•  27-55 BTU/Hr.
•  System AC input VA requirement: 218.5VA.

•  Enclosure Dimensions (H x W x D approx.):
 15.5” (393.7mm) x 12” (304.8mm) x 4.5” (114.3mm)
  -  Accommodates two (2) 12VDC/12AH batteries.
•  Product weight (approx.): 12.0 lbs. (5.44 kg.).
•  Shipping weight (approx.): 12.9 lbs. (5.85 kg.).

UL 294

UL Listed for Access Control

 

System Units.

UL 1481  UL Listed Standard for Safety for

Fire Protective Signaling Systems.

CUL Listed - CSA Standard C22.2 
No.205-M1983, Signal Equipment.