Whirlpool F195LEH Manual Do Utilizador

After cleaning the gas tube opening and ports,

replace the burner
cap. To replace the
burner cap, make
sure the alignment
pins on the cap are
properly aligned with
the burner base.

S

EALED SURFACE BURNERS AND COOKTOP

(

CONT

.

)

CARING FOR YOUR RANGE

To clean the burners:

Pull the burner cap straight up from the 
burner base.

Clean the burner cap with warm, soapy water
and a sponge. You can also clean it with a 
mildly abrasive scrubbing pad or cleanser. 
Do not clean the burner cap in a dishwasher or
self-cleaning oven.

If the gas tube opening has become soiled or
clogged, use a cotton swab or a soft cloth to
clean the area.

straight pin. Do not
enlarge or distort
the port. Do not use
a wooden tooth-
pick. If the burner
needs to be adjust-
ed, call a qualified
technician for ser-
vice.

Turn on the burner to see if it will light. If the
burner does not light after you have cleaned 
it, recheck cap alignment or contact a 
designated  service technician. Do not service
the sealed burner yourself.

R

EMOVING THE OVEN DOOR

For normal use of your range, you do not need to
remove the door. However, if you find it necessary
to remove the door, follow the instructions in this
section. 

NOTE: The oven door is heavy.

Use a putty knife or screwdriver and insert it at
the bottom corner of the door stop clip.

Pry door stop clip free and remove from front
frame hinge slot. Take care not to scratch 
porcelain.

Repeat procedure for other door stop clip.