D-Link DAP-2553 DAP-2553/A Folheto
Códigos do produto
DAP-2553/A
Technical Specifications
Standards
IEEE 802.11n
IEEE 802.11a
IEEE 802.11g
IEEE 802.3ab
IEEE 802.3af
IEEE 802.3u
IEEE 802.3
Network Management
Command Line Interface
- Telnet
- Secure (SSH) Telnet
Web Browser interface
- HTTP
- Secure HTTP (HTTPS)
D-View 6.0
AP Manager II
SNMP Support
- Private MIB
AP Array
Security
WPA™-Personal
WPA
TM
-Enterprise
WPA2™-Personal
WPA2
TM
-Enterprise
64/128-bit WEP
SSID Broadcast Disable
MAC Address Access Control
Network Access Protection
802.1X
Wireless Frequency Range
2
2.4GHz (2.4GHz to 2.4835GHz)
5GHz (5.15GHz to 5.35GHz and 5.47GHz to 5.85GHz)
Operating Modes
Access Point (AP)
WDS
WDS with AP
Wireless Client
Maximum Transmit Output Power
3
21dBm @ 2.4GHz
20dBm @5GHz
Dipole Antenna Gain
3dBi@2.4GHz
5dBi@5GHz
LEDs
Power
5GHz
LAN
2.4GHz
Operating Voltage
5V2.5A or 48VDC +/- 10% for PoE
Temperature
Operating: 32°F to 104°F (0°C to 40°C)
Storing: -4°F to 149°F (-20°C to 65°C)
Humidity
Operating: 10% ~ 90% (Non-condensing)
Storing: 5% ~ 95% (Non-condensing)
Certifications
FCC
CE
C-Tick
IC
CSA
Wi-Fi
®
Weight
0.9 lbs (400g)
Dimensions (WxLxH)
198 x 120 x 32 mm
Air
Premier N Dual Band PoE Access Point
1
Maximum wireless signal rate derived from IEEE Standard 802.11g, 802.11a, and 802.11n specifications. Actual data throughput will vary. Network conditions
and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate.
Environmental factors will adversely affect wireless signal range.
2
Please note that operating frequency ranges vary depending on the regulations of individual countries and jurisdictions. The DAP-2553 may not be supported in the
5.25~5.35 GHz and 5.47~5.725 GHz frequency ranges in certain regions.
All references to speed and range are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual
product appearance may differ from that depicted herein.
3
The maximum transmit power is available with 2 antennas. The value for 1 antenna is 18dBm @ 2.4GHz and 17dBm @ 5GHz.
Multiple Operation Modes
The DAP-2553 can be configured to optimize network
performance based on any one of its multiple operation
modes: Access Point, Wireless Distribution System (WDS)
with Access Point, WDS/Bridge (No AP Broadcasting)
and Wireless Client. With WDS support, network
administrators can set up multiple DAP-2553s throughout
a facility and configure them to bridge with one another
while also providing network access to individual clients.
Also included are advanced features such as Spanning
Tree Protocol support, which allows greater efficiency
and avoids broadcast storms when used in WDS mode.
DAP-2553
D-Link Corporation
No. 289 Xinhu 3rd Road, Neihu, Taipei 114, Taiwan
Specifications are subject to change without notice.
D-Link is a registered trademark of D-Link Corporation and its overseas subsidiaries.
All other trademarks belong to their respective owners.
©2010 D-Link Corporation. All rights reserved.
Release 05 (June 2010)