Valcom Marine Horns V-1048M Folheto
Códigos do produto
V-1048M
45 OHM TALKBACK
MARINE HORN
MODEL
V-1048M
Valcom, Inc. 5614 Hollins Road Roanoke, Virginia 24019 Phone: 540-563-2000 Fax: 540-362-9800
E-Mail: info@valcom.com www.valcom.com
Page
2
Technical Specification
ARCHITECTS’ AND ENGINEERS
The 45 Ohm Talkback Marine Horn, Model V-1048M, shall be weather-resistant, high efficiency re-entrant type
horn. It shall include a detachable base for wall or single, double, or octagon electrical box mounting and omni-
directional ball joint mounting bracket to allow precise positioning in the vertical and horizontal planes with a
single adjustment. An I-beam mounting clamp shall also be provided.
The frequency response shall be 225 Hz to 14 kHz. Dispersion shall be 120° horizontal and 90° vertical. Voice
coil impedance shall be 45 ohms. Operating temperature shall be -4 to 131 °F (-20 to 55 °C). Operating
humidity shall be 0-95% non-condensing.
The horn and mounting base shall be constructed of high impact ASA plastic that resists deteriorating effects of
salt, sun, and high humidity. The finish shall be white. The I-beam mounting clamp shall be constructed of zinc
chromate plated steel.
Dimensions of the horn shall be 7.38 "H x 10.0 "W x 10.4 "D (18.7452 cm x 25.4 cm x 26.416 cm). Weight shall
be approximately:
horn. It shall include a detachable base for wall or single, double, or octagon electrical box mounting and omni-
directional ball joint mounting bracket to allow precise positioning in the vertical and horizontal planes with a
single adjustment. An I-beam mounting clamp shall also be provided.
The frequency response shall be 225 Hz to 14 kHz. Dispersion shall be 120° horizontal and 90° vertical. Voice
coil impedance shall be 45 ohms. Operating temperature shall be -4 to 131 °F (-20 to 55 °C). Operating
humidity shall be 0-95% non-condensing.
The horn and mounting base shall be constructed of high impact ASA plastic that resists deteriorating effects of
salt, sun, and high humidity. The finish shall be white. The I-beam mounting clamp shall be constructed of zinc
chromate plated steel.
Dimensions of the horn shall be 7.38 "H x 10.0 "W x 10.4 "D (18.7452 cm x 25.4 cm x 26.416 cm). Weight shall
be approximately:
3.5 lbs (1.575 kg)
.
LEXAN
® Registered Trademark of General Electric Co.
LIMITED WARRANTY
Valcom, Inc. warrants its products to be free from defects in materials and workmanship under conditions of
nor-mal use and service for a period of one year from the date of shipment. The obligation under this warranty
shall be limited to the re-placement, repair or refund of any such defective device within the warranty period,
provided that:
nor-mal use and service for a period of one year from the date of shipment. The obligation under this warranty
shall be limited to the re-placement, repair or refund of any such defective device within the warranty period,
provided that:
1. inspection by Valcom, Inc. indicates the validity of the claim,
2. the defect is not the result of damage, misuse, or negligence after the original shipment,
3. the product has not been in any way repaired by others and that factory sealed units are unopened (A
2. the defect is not the result of damage, misuse, or negligence after the original shipment,
3. the product has not been in any way repaired by others and that factory sealed units are unopened (A
service charge plus parts and labor will be applied to units defaced or physically damaged).
4. freight charges for the return of products to Valcom, Inc. are prepaid,
5. all units “out of warranty” are subject to a service charge. The service charge will cover minor repairs
5. all units “out of warranty” are subject to a service charge. The service charge will cover minor repairs
(major repairs will be subject to additional charges for parts and labor)
This warranty is in lieu of and excludes all other warranties expressed or implied, and in no event shall Valcom, Inc.
be liable for any anticipated profits, consequential damages, loss of time or other losses incurred by the buyer in
connection with the purchase, operation or use of the product.
This warranty specifically excludes damage incurred in shipment. In the event a product is received in damaged condition,
the carrier should be notified immediately. Claims for such damage should be filed with the carrier involved in accordance
with the F.O.B. point.
be liable for any anticipated profits, consequential damages, loss of time or other losses incurred by the buyer in
connection with the purchase, operation or use of the product.
This warranty specifically excludes damage incurred in shipment. In the event a product is received in damaged condition,
the carrier should be notified immediately. Claims for such damage should be filed with the carrier involved in accordance
with the F.O.B. point.